Shenzhen mounted magnetic lock

Product No :BHL-3001SLD

Shenzhen mounted magnetic lock product specifications are as follows:

Body size: 250mm long X53mm wide X29mm high

Iron block size: 180mm long X44mm wide X13mm high

Withstａnd tension: 380KG (830LBS) linear tension

Input voltage: DC12 or 24V

Current consumption: 12V/480mA, 24V/240mA

Opening method: 90°

Optional accessories: wooden door fire door iron block with LZ bracket BHB-130L

          Lower frameless glass door with U-shaped bracket BHB-122U

Adaptation range: glass door, wooden door, fire door, wrought iron door

Professional device: built-in surge absorber and reverse current protection device

Safety type: power off unlock

Delay function: 0 to 10 seconds (BHL-3001SLDs with delay)

Signal output: with two-color indicator light (red light after unlocking, green light after locking), dry contact output with lock status detection (COM, NC, NO), maximum withstａnd power 3A, NO output when locked; with door status detection Dry contact output (NO after locking)

Surface temperature: ambient temperature +20 ° C or less

Operating temperature: -40 to +60 ° C

Use humidity: 0-90% (relative air humidity)

Shell treatment: sandblasting anodizing plating treatment

Lock body treatment: fine grinding and environmental protection zinc

Iron block treatment: fine grinding and environmental protection zinc

Product weight: 2.2kg / handle

Note: In order to ensure the normal use of the lock 1, pay attention to the lock body and the iron block to be completely and smoothly connected during installation; 2, the iron block needs a little active clearance; 3, the lock body, the iron block suction surface must not be scratched, Bruises, falls; 4, pay attention to the use of ambient temperature, humidity, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring; 6, usually must be maintained; 7, other incomplete matters please Carefully refer to the installation and operating instructions;

Product advantages: This product pulls the foot, wears, uses electromagnetic suction work, no mechanical failure, professional no residual magnetism, insulation design treatment, built-in reverse current protection device

Product Warranty: In the quality problem caused by non-human factors, our magnetic lock series products provide 19 months quality assurance service. The warranty period of electric lock, cathode lock and other accessory parts is 12 months, resulting in other conditions. Product damage, maintenance materials and other expenses are at the user's own expense; qualified by ANSI, CE, ROHS, UL;

Product Declaration: The company reserves the right to modify the model, specifications and parameters of this product without prior notice. The pictures and related contents of all products are not authorized by Binghong Electronics and may not be used in any other way. Thank you for your cooperation!