Welcome Customer !

Membership

Shenzhen Behost Electronics Co. Ltd
Free Member ·1YRS
ShenZhen,GuangDong
Manufacturer

Main Products: Fingerprint Lock|IC Card Lock|Magnetic Lock

Xwboo>Products

270KG single door magnetic lock

Model
Nature of the Manufacturer
Manufacturer
Product Category
Magnetic lock
Place of Origin
City, Province
Overview
270KG single door magnetic lock
Product Details

Product No :FSP-2001


Product specifications are as follows:


270KG single door magnetic lock body size: 250mm long X47mm wide X27mm high


Iron block size: 180mm long X38mm wide X12.7mm high


Withstand tension: 270kg (600Lbs) linear tension


Input voltage: DC12


Current consumption: 12V/480mA


Opening method: 90°


Optional accessories: wooden door fire door iron block with LZ bracket


           Up and down frameless glass door with frameless door clamp


           Under frameless glass door with U-shaped bracket


           L-shaped bracket with fixed lock body for narrow door frame


Adaptation range: glass door, wooden door, fire door, wrought iron door


Professional device: built-in surge absorber and reverse current protection device


Safety type: power off unlock


270KG single door magnetic lock

Signal output: FSP-2001 without LED indicator, stateless detection signal output


           FSP-2001S with LED indicator, with lock status detection signal output


           FSP-2001SLD with LED indicator, with door magnet and lock status detection signal output


Delay function: Customizable delay (0-10 seconds)


Surface temperature: ambient temperature +20 ° C or less


Operating temperature: -40 to +60 ° C


Use humidity: 0-90% (relative air humidity)


Shell treatment: aluminum tank, aluminum strip blasting anodizing plating treatment (or sand blasting oxidation)


Lock body treatment: fine grinding and environmental protection zinc


Iron block treatment: fine grinding and environmental protection zinc


Product weight: 2 kg / handle



Note: In order to ensure the normal use of the lock 1, pay attention to the lock body and the iron block to be completely and smoothly connected during installation; 2, the iron block needs a little active clearance; 3, the lock body, the iron block suction surface must not be scratched, Bruises, falls; 4, pay attention to the use of ambient temperature, humidity, choose the appropriate lock; 5, must use sufficient power supply, and accurate wiring; 6, usually must be maintained; 7, other incomplete matters please Carefully refer to the installation and operating instructions;

Similar Product Recommend