Pneumatic ceramic feed valve
Characteristice:
This valve is applicable for discharge and transportation of dry ash systems in power plants and storehouse pump, or can be used as an on-off for pipelines containing abrasive dry ash, water(such as cinder water) and the like in mines. Papermaking, chemical engineering and so on, Its working nominal pressureis 1.0MPa, applicable temperature≤200℃,and airsupply pressure 0.6-0.8MPa.
After the valve is closed, it’s fully sealed in any direction. Its middle body adopts WCB steel casting and seamless steel pipe welding, Its sealing surface adopts a hard sealing element.
Its feed inlet is fully through without any biocks, and it has an anti blockage blowing unit, with strong abrasion resistance, a good seal ability, a small starting load and with little ash seizure or accumulation.
It adopts a high-grade toughened structural ceramic seal. Featuring high mechanical strength, strong abrasion resistance, a long service life and a compact structure, which can be installed at any angle.
Materials for main parts
Item | Name | Material | Item | Name | Material |
1 | Body | WCB | 7 | Middle body | WCB |
2 | Plate | Composite engineering ceramic | 8 | Packing | Flexible Graphite |
3 | Seat | Composite engineering ceramic | 9 | Packing gland | 2Cr13 |
4 | Stem | 2Cr13 | 10 | Bracket | Q235 |
5 | Stud | 35CrMoVA | 11 | Pneumatic device | |
6 | Nut | 25 | | | |
Application specification
Design and manufacture | CB/T12224 |
Connection end dimension | Structural length | Manufacturer’s standard |
Flange dimension | JB/T 79.1 |
Inspection and test | GB/T 9092 |
Material | Carbon steel | GB/T 12229 |
Stainless steel | GB/T 12230 |
Mark | GB/T 12220 |
Supply | GB/T 12252 |