Product Overview
Gospell’s GT-5900-1600 is a medium power air-cooled UHF terrestrial DTV transmitter which combines up to four power amplifier modules with a maximum 1600W of output power. It has superior performance and enhanced efficiency by adopting a series of technologies. It can work in any frequency within the UHF span, and the transmitting bandwidth can be up to 80MHz.
This series of products has an optimized design in forced air cooling and architecture, with lower noise, higher efficiency and outstanding anti-interference performance; GT-5900-1600 series can support a wide range of Digital Terrestrial Television (DTT) standards, such as DVB-T/H, ATSC, DTMB, ISDB-T/Tb and even the latest DVB-T2 standards.
By incorporating our latest technologies of linear and non-linear digital adaptive pre-correction, RF delay and co-channel interference rejection, this system fulfills the needs of single band or broadband transmission in medium to large-scale terrestrial coverage scenarios.
Block Diagram
Technical Specifications
Items | Ordering Codes | GT-5900-800 | GT-5900-1000 | GT-5900-1200 | GT-5900-1600 |
General Parameter | Output Power(RMS)* | 800W | 1000W | 1200W | 1600W |
Number of PAs | 3 | 4 |
Number of Power Supplies | 3 | 4 |
Weight | 230Kg(507 lbs) | 250Kg (551 lbs) |
Frequency Range(FIN) | 470 to 860MHz |
Channel Bandwidth | 6MHz, 8MHz |
Supported Standards | DVB-T2, DVB-T/H, DTMB, ATSC, ISDB-T/Tb |
Transmitting Mode | Standard: Single band Optional: Broadband(maximum 80MHz) |
Supported Network | SFN or MFN |
Cooling Method | Forced Air Cooling with top-mounted ventilation flue |
Dimensions (W x H x D) | 650mm x 1700mm(35U) x 1000mm (25.6’’ x 66.9’’ x 39.4’’) |
Notes: * The above output powers are calculated per ATSC/ DTMB standards under single band mode. |
Main Components | Preamplifier | 1 x Preamplifier module(3U) |
Exciter (Optional)** | 1 x DVB-T2/DTMB Exciter(modulator) (1U)** |
Power Splitter and Combiner | Built-in |
Monitoring and Control Unit | 1 x Monitoring control unit(2U) with 7" LCD touch screen |
Bandpass Filter(Optional) | Optional Single band or broadband Bandpass filter |
Notes: ** Please contact our sales representative for the other exciter/modulator requirements. |
Environmental | Operating Temperature | 0 to 45°C |
Operating Humidity | 0 to 95%, non-condensing |
Power Supply | AC Input | Three-Phase Option | 4 wires (3-phase + neutral), 342-418V AC, 50Hz±5% |
Single-Phase Option | 2 wires, 190-250V AC, 50Hz±5% |
Surge Protection | Built-in AC Surge Protector |
I/O Interface | TS Input | DVB-ASI (BNC female, 75Ω) (DTMB/DVB-T2 Exciter) |
MPEG-TS over IP | 100/1000Base-T, RJ-45 (DVB-T2 Exciter) |
RF Output | EIA 1-5/8’’ flange |
1PPS Clock Input | BNC, female, 50Ω(DTMB/DVB-T2 Exciter) |
10MHz Clock Input | BNC, female, 50Ω(DTMB/DVB-T2 Exciter) |
RF Monitor Output | SMA, female, 50Ω |
Monitoring & Control | Local Monitoring & Control | TFT LCD touch screen |
Network Management Interface | 10/100 Base-T Ethernet, 1 x RJ-45, Supporting Web-browser or SNMP network management |
Electric Performance | Frequency Stability | ≤ ±1 x 10-7(Internal reference) ≤ ±1 x 10-10 (External 10MHz reference clock) |
Frequency Accuracy | MFN: ≤ ±100Hz, SFN: ≤±1Hz |
MER | ≥33 dB |
Shoulder of Signal @fc±4.2MHz | ≤ -36dB |
In-band non-flatness@fc±3.591MHz | ≤ ±0.5dB |
AGC Power Control Range (∆GAGC) | ±8dB |
Stability of Output Power (∆POUT) | ≤ ±0.5dB |