GT-5900-3000 High Power Air-Cooled UHF Terrestrial DTV Transmitter

NegotiableUpdate on September 29

Model

Nature of the Manufacturer: Other

Product Category: DTT Transmitter

Place of Origin: City, Province

Online Consult Contact Information

Overview

Main Features and Benefits• High Performance• High Flexibility and Stability• High Adaptability and Availability• Lower CAPEX/OPEX• User Friendly Monitoring Interface

Product Details

Product Overview

8-ChMPEG-2/H.264标清编码器

Gospell’s GT-5900-3000 is a high power air-cooled UHF terrestrial DTV transmitter which combines up to eight power amplifier modules with a maximum 3000W of output power. It has superior performance and enhanced efficiency by adopting a series of technologies. It can work in any frequency within the UHF span, and the transmitting bandwidth is up to 80MHz.

This series of products has an optimized design in forced air cooling and architecture, with lower noise, higher efficiency and outstanding anti-interference performance; GT-5900-3000 series can support a wide range of Digital Terrestrial Television (DTT) standards, such as DVB-T, ATSC, DTMB, ISDB-Tb and even the latest DVB-T2 standards.

By incorporating our latest technologies of linear and non-linear digital adaptive pre-correction, RF delay and co-channel interference rejection, this system fulfills the needs of single bａnd or broadbａnd transmission in large-scale terrestrial coverage scenarios.

Block Diagram

8-ChMPEG-2/H.264标清编码器

GT-5900-3000

Diagram 1 GT-5900-3000 Block Diagram

Technical Specifications

8-ChMPEG-2/H.264标清编码器

Items	Ordering Codes		GT-5900-2000	GT-5900-2500	GT-5900-3000
General Parameter	Output Power(RMS)*		2000W	2500W	3000W
	Number of PAs		6	8
	Number of Power Supplies		6	8
	Weight		450Kg(992 lbs)	500Kg (1102 lbs)
	Frequency Range(FIN)		470 to 860MHz
	Channel Bandwidth		6MHz, 8MHz
	Supported Standards		DVB-T2, DVB-T/H, DTMB, ATSC, ISDB-T/Tb
	Transmitting Mode		Single bａnd or broadband(maximum 80MHz)
	Supported Network		MFN,SFN
	Cooling Method		Forced Air Cooling with top-mounted ventilation flue
	Dimensions (W x H x D)		1177mm x 1790mm(35U) x 1150mm (46’’ x 70.5’’ x 45’’)
	Notes: * The above output powers are calculated per ATSC/ DTMB standards under single bａnd mode.
Main Components	Preamplifier		1 x Preamplifier module(3U), optional 1 + 1 redundant configuration
	Exciter (optional)**		1 x DVB-T2/DTMB Exciter (1U), optional 1 + 1 redundant configuration
	Preamplifier Switchover Unit		2U, Optional
	Exciter Switchover Unit		1U, Optional
	Power Splitter and Combiner		Built-in
	Monitoring and Control Unit		1 x Monitoring control unit(2U), 1 x 7" LCD touch screen
	Bandpass Filter		Optional Single bａnd or broadbａnd Bandpass filter
	Notes: ** Please contact our sales representative for the other exciter/modulator requirements.
Environmental	Operating Temperature		0 to 45°C
	Operating Humidity		0 to 95%, non-condensing
Power Supply	AC Input	Three-Phase Option	4 wires (3-phase + neutral), 342-418V AC, 50Hz±5%
		Single-Phase Option	2 wires, 190-250V AC, 50Hz±5%
	Surge Protection		Built-in AC Surge Protector
I/O Interface	TS Input		DVB-ASI (BNC female, 75Ω) (Exciter)
	MPEG-TS over IP		100/1000Base-T, RJ-45 (Exciter option)
	RF Output		EIA 1-5/8’’ or EIA 3-1/8’’ flange
	1PPS Clock Input		BNC, female, 50Ω(Exciter)
	10MHz Clock Input		BNC, female, 50Ω(Exciter)
	RF Monitor Output		SMA, female, 50Ω
Monitoring & Control	Local Monitoring & Control		TFT LCD touch screen
	Network Management Interface		10/100 Base-T Ethernet, 1 x RJ-45, Supporting Web-browser or SNMP network management
Electric Performance	Frequency Stability		≤ ±1 x 10-7(Internal reference) ≤ ±1 x 10-10 (External 10MHz reference clock)
	Frequency Accuracy		MFN: ≤ ±100Hz, SFN: ≤±1Hz
	MER		≥33 dB
	Shoulder of Signal @fc±4.2MHz		≤ -36dB
	In-bａnd non-flatness@fc±3.591MHz		≤ ±0.5dB
	AGC Power Control Range (∆ GAGC)		±8dB
	Stability of Output Power (∆ POUT)		≤ ±0.5dB