GT-5330 Indoor monitoring unit

NegotiableUpdate on September 29

Model

Nature of the Manufacturer: Other

Product Category: DTT Transmitter

Place of Origin: City, Province

Online Consult Contact Information

Overview

Main Feature• Supports single / dual inputs, suitable for single-channel and broadbａnd transmit systems;• Modular design for easy installation, maintenance and upgrade;• Perfect support UHF1 ~ 300W transmitter main switch system;• Support automatic switching and emergency switching two kinds of switching mode, the emergency switch with full hardware design, automatic switching system failure to complete the system switch;• Tight tolerance of fault-tolerant design to improve the safety of transmitting equipment......

Product Details

Product Description

8-ChMPEG-2/H.264标清编码器

Gospell GT-5330 indoor monitoring unit is one of the core devices of Gospel launch monitoring system. It receives the detection information from the transmitting device through the TCP / IP interface and judges whether it needs to be switched according to the device status and issues related commands to the transmitting system . At the same time, the device status is transmitted to the remote management center and accepted by the remote management center for analysis after various control commands are sent to the transmitting system to implement the transmitting system management. Device built-in signal switch to complete the transmitter input signal switching. The device is mainly used in the GaussBel UHF1 ~ 300W transmitter standby switch system.

Equipment application diagram

8-ChMPEG-2/H.264标清编码器

室内监控单元

Technical specifications

8-ChMPEG-2/H.264标清编码器

General specifications	Size( W * H * D )	48388300mm(19吋2U)
	Weight	5KG
	operating temperature range	0~40°C
	Storage temperature range	-25~85℃
	Ambient humidity range	10%~90% No condensation
Power Supply	Input voltage	AC 220V±10% 50Hz
Power Supply	Power consumption	25W
Electrical Interface	Management interface	1 x RJ-45, 10/100 Base-TE thernet
	Control interface	3*DB-9M( Connected to the main, backup transmitter and switch)
	Signal to switch RF input	Single input 1 * N-50K Double input 2 * N-50K
	Signal to switch RF output	2*N-50K
Signal Change Switch Input signal level		93±8dBu
Signal switch the main switch isolation		≧58dB
Output VSWR		≤1.5
Insertion loss		Single input ≥0.3dB Double input ≥ 2.5dB
In-bａnd unevenness		≥0.3dB
Control voltage		DC 12V±0.5V
Data error		≤1%
Switch the completion time		≤10S