OSDP converter is used for protocol conversion between OSDP device and legacy device. It can realize the conversion between Wiegand/ABA and OSDP protocol . Working mode can be selected by DIP switch configuration. When working as reader mode, the format of legacy reader and door device are converted into 2-wire OSDP protocol to connect to OSDP compatible access controller. When working as controller mode, the format of OSDP reader is converted into the Wiegand/ABA format , then connect to legacy access controller.
Key Features
● 12V DC power for the OSDP converter can be supplied by the access controller or reader
● Supporting the conversion between Wiegand/ABA and OSDP protocol
● The mode settings are simple . Address can be set by DIP switch
● All reader and I/O signals are monitored and controlled by the OSDP compatible controller
Wiring diagram

Specification
| Model | MG-OSDP |
| Dimension | 80*62*20mm |
| Power | DC 12V±10%, 100mA |
| Indicate light | Two LED light indicate power and communication status |