- Phone
-
Address
SHUNBANG Group Industrial Park, Junzi North Road, Shanxian Development Zone, Shandong
Membership
Help
Shandong xinkekaibang telecommunication equipment Co.,Ltd.Free·1YRS
SHUNBANG Group Industrial Park, Junzi North Road, Shanxian Development Zone, Shandong





| G652 | G655 | 50/125 | 62.5/125 | ||
| attenuation | 1310 nm | ≤0.35 dB/km | |||
| 1550 nm | ≤0.21 dB/km | ≤0.22 dB/km | |||
| 850 nm | ≤3.0 dB/km | ≤3.5 dB/km | |||
| 1300 nm | ≤1.0 dB/km | ≤1.0 dB/km | |||
| Bandwidth (Class A) | 850 nm | ≥600 MHz·km | ≥200 MHz·km | ||
| 1300 nm | ≥1200 MHz·km | ≥600 MHz·km | |||
| numerical aperture | 0.200±0.015NA | 0.275±0.015NA | |||
| Optical cable cutoff wavelength | ≤ 1260 nm | ≤ 1450 nm | |||
| Type | material | value | |
| Structure | 光纤 | G652D / G655... | 2-48core |
| Protective tube | stainless steel tube | 1.5-6.0mm | |
| Stranded single wire | Aluminum clad steel / aluminum alloy / aluminum rod | 1.5-6.0mm | |
| Maximum outer diameter | 18mm | ||
| Maximum sectional area | 200mm² | ||
| Mechanical properties | Maximum pull(RTS)KN | 280 | |
| Maximum flattening force(N/100mm) | 2200 | ||
| Maximum short circuit current capacity(40℃~200℃)(kA2s) | 100 | ||
| Minimum bending radius (dynamic) | 20D | ||
| Minimum bending radius (static) | 15D | ||
| Environmental performance | Installation temperature range (℃) | -10~+50 | |
| Operating and storage temperature range (℃) | -40~+65 | ||
| NO. | technical parameter | ||||||||
| Product model | optical cable structure | maximum optical fiber quantity | aluminum clad steel section | rated breaking force | outer diameter ﹣ unit length mass | allowable short circuit current capacity | 20 ℃ DC resistance | Allowable short circuit current capacity | |
| (芯) | (mm2) | (mm) | (kg/km) | (kN) | (Ω/km) | (40-200℃ kA2.s) | |||
| 1 | OPGW-24B1.3-40-[51;9] | 6/3.0/20AS,Optical unit 1/3.0 | 24 | ≈40 | 9 | ≤304 | ≥51 | ≤2.10 | ≥9 |
| 2 | OPGW-24B1.3-50-[58;11.5] | 6/3.2/20AS,Optical unit 1/3.2 | 24 | ≈50 | 9.6 | ≤345 | ≥58 | ≤1.82 | ≥11.5 |
| 3 | OPGW-48B1.3-70-[77;24] | 6/3.8/20AS,Optical unit 1/3.8 | 48 | ≈70 | 11.4 | ≤475 | ≥77 | ≤1.30 | ≥24 |
| 4 | OPGW-48B1.3-70-[42;38] | 6/3.8/40AS,Optical unit 1/3.8 | 48 | ≈70 | 11.4 | ≤340 | ≥42 | ≤0.70 | ≥38 |
| project | test method | Acceptance criteria |
| pull | GB/T 7424.2-E1 | The 40% RTS fiber has no obvious strain (0.01%) and no obvious additional attenuation (0.03db). |
| Load: according to the change of optical cable structure, sample length: not less than 10m; link length: not less than 100m; duration: 1min | The strain of 60% RTS optical fiber is less than 0.25%, and the additional attenuation of optical fiber is less than 0.05db (after the tension is cancelled, there is no obvious residual additional attenuation of optical fiber (0.03db)。 | |
| Squash | GB/T 7424.2-E3 | After the test, the additional attenuation of single-mode fiber at 1550nm should not be greater than 0.05db/fiber, and OPGW has no mechanical damage |
| Load: according to the above table, test 3 points, duration: 10min | ||
| Water seepage | GB/T 7424.2-F5 | No water seepage |
| Time: 1 hour sample length: 0.5m water height: 1m | ||
| Temperature cycle | GB/T 7424.2-F1 | After the test, the additional attenuation of single-mode fiber at 1550nm should not be greater than 0.1dB |
| Sample length: not less than 500m, temperature range: - 40 ℃ ~ + 70 ℃, cycle times: 2, holding time: not less than 12h |