- Phone
-
Address
SHUNBANG Group Industrial Park, Junzi North Road, Shanxian Development Zone, Shandong
Membership
Help
Shandong xinkekaibang telecommunication equipment Co.,Ltd.Free·1YRS
SHUNBANG Group Industrial Park, Junzi North Road, Shanxian Development Zone, Shandong
Product description
Fiber optic patch cord (also known as optical fiber connector) is used to connect equipment and optical fiber wiring link by installing connector joints on both ends of optical fiber cable. If plug is installed at one end, it is called pigtail. Optical fiber connector is widely used in network wiring, to a certain extent, it also affects the reliability and other performance of the whole optical card transmission system.
Product features
*Low insertion loss, high return loss
*The material of outer sheath is PVC, LSZH and other materials
*The optical cable material meets the flame retardant grade of ofNR and ofnp
*Meet Rosh standard
*Three kinds of grinding methods: PC, UPC and APC
*Mechanical durability 500 times
Product standard
Meet YD / T 1272.1-2003 YD / t2052-2010 standard
| Model definition: | KB - jumper type - Interface Model / interface model & length - number of cable cores - fiber type |
| Interface model: | TX: conventional; WL: tail cable; SZ: bundle; FZ: branch; KZ: Armored; YZ: field; ly: pull away; JZ: bundle; YDJ: pre termination |
| Interface model: | TX: conventional; WL: tail cable; SZ: bundle; FZ: branch; KZ: Armored; YZ: field; ly: pull away; JZ: bundle; YDJ: pre termination |
| Length: | 1M;2M.3M.4M.10M... |
| Fiber number | Single Core: 1F; double core: 2F; four core: 4F..... |
| Fiber type: | single mode: SM, multimode 62.5/125: mm, multimode 50 / 125: om2; single mode 10 Gigabit: OS2, Multi mode 10 Gigabit 150: OM3, multi-mode 10 Gigabit 300: OM3 / 300, multi-mode 10 Gigabit 550: OM4 |
| Connector models | FC、SC、LC、ST、MU、E2000、D4、DIN | |||
| SM | MM | |||
| End face specification | PC | UPC | APC | PC |
| IL(dB) | <0.3 | <0.2 | <0.3 | <0.3 |
| RL(dB) | >45 | >50 | >60 | >35 |
| Other models | MT-RJ、MPO | |||
| IL(dB) | <0.7 | / | <0.7 | <0.5 |
| RL(dB) | >30 | / | >50 | >25 |
| End geometry (3D) standard: | ||||||
| Project | PC、UPC | APC | ||||
| SC、 FC、 ST、 E2000、 D4、DIN | LC、MU | SC、FC、 E2000 | LC、MU | |||
| SM | MM | SM | MM | SM | SM | |
| Radius of curvature (mm) | 10-25 | 7-20 | 5-12 | |||
| Vertex offset (Mm) | <50 | <30 | ||||
| Optical fiber depression(nm) | ±100 | |||||
| Angle deviation(°) | 0 | 8±0.3 | ||||
| Bond angle deviation(°) | 0 | ±0.5 | ||||
| Optical fiber diameter (卩m) | 123-135 | |||||