Digital Display Panel

Features (fast on / off laser function added)

The panel has simple design, small power consumption, simple wiring, intuitive operation, high control accuracy.It has strong anti-interference ability (software, hardware) and memory function.At the same time, because it's the most the large working current is less than 30mA (the measured maximum working current is about 25mA {panel lights up the display mode, all strokes show 88.8}),The 5V power supply of any laser power supply can meet its power supply requirements,It can be directly connected with integrated laser power supply or independent laser power supply,No additional power supply is required.

Benefits of direct connection to the laser power supply:

Amplitude of logic control level、The PWM output amplitude is completely consistent with the requirements of the laser power supply,The control is safe and reliable,The control circuit latch of the laser power supply will not be damaged due to unexpected circumstances.

Connection method with integrated laser power supply

On the left side of the connection socket,Marked with K + k - 5V in G,Connect to the same position of the integrated laser power supply according to the mark.

Connection method with independent laser power supply

Below the connection socket,It is marked with L G 5V in G,Connect to the independent laser power supply according to the mark at the same position(L connected to TL of laser power supply)，two G，Connect any G to the laser power supply,It is not necessary to connect both G's;We will provide the connecting line;

Here are some instructions for some double key combination operations:

1. Press + 10% key and - 10% key at the same time to quickly set the laser energy to the maximum, i.e. 99.9%;

2. Press + 1% key and - 1% key at the same time to quickly set the laser energy to 50.0%;

3. Press the + 0.1% and - 0.1% buttons at the same time to set the laser energy to 0.0%, i.e. turn off the laser;

New functions:After turning off the laser,Press any of the buttons + 10%, - 10%, + 1%, - 1%, + 0.1%, - 0.1%,Will restore the original settings.For example, the laser machine has a red preview,There's no need for a laser to preview,Then press the + 0.1% and - 0.1% buttons at the same time,Turn off the laser.When the preview is correct,It's time to start carving,Then press any key (except test key),The set laser energy can be recovered;

1. Press + 10% and + 1% buttons at the same time to quickly set the laser energy to 75.0%;

2. Press + 1% button and + 0.1% button at the same time to quickly set the laser energy to 25.0%;