，-
E-mail
market@micmachinery.com
-
Phone
+8613083991987
-
Address
52 Longquanwan XueYan town, Wujin zone, Changzhou, Jiangsu, China. 213169
Product Categories
- Emulsifying Mixer
- Emulsifier Machine
- Emulsifying Machine
- Vacuum Emulsifier Mixer
- Vacuum Homogenizer Mixer
- Cosmetic Homogenizer
- Planetary Mixer
- Battery slurry mixing machine
- Planetary vacuum mixer
- Sealant mixing machine
- High Viscosity Mixing Equipment
- Vacuum Emulsifying Mixer
- Labeling Machine
- Bopp Labeling Machine (Hot Melt Glue Labeling Machine Fast Speed)
- Wet Glue Labeling Machine
- Syringe Labeling Machine
- Shrink Sleeve Labeler (Shrink Sleeve Cutting Labeling Machine Fast Speed)
- Vial Labeling Machine (Horizontal Labeling Machine Suits Syringe Tube Vials)
- Double Side Labeling Machine (Suits Box Carton Oval Square Bottle)
- Flat Bottle Labeling Machine (Flat Surface Bottle Box Pouch Bag)
- Other Types Of Labeling Machines
- Label Applicator Machine (Suits Bottle Can Tube Syringe Jar Flat Surface)
- Bottle Labeler (Suits Tube Jar Wine Bottle Box Beer Cans)
- Round Bottle Labeling Machine (For Round Bottle Labeling）
- Capping Machine
- Filling Machine
- Beer, wine, beverage filling machine
- Chemical products filling machine
- Cosmetic products filling machine
- Food products filling machine
- Medical products filling machine
CHANGZHOU MIC MACHINERY CO.,LTDFree·1YRS
MIC Disinfectant Packing Machine ( Essential Oil, Eye Drop, 30-90 Bottles/min )
NegotiableUpdate on June 29
- Model
- Nature of the Manufacturer
- Other
- Product Category
- Medical products filling machine
- Place of Origin
- City, Province
Overview
MIC Disinfectant Packing Machine ( Essential Oil, Eye Drop, 30-90 Bottles/min )
Product Details
This syrup filling machine is suitable for:
A variety of small doses of liquid filling & capping such as medical alcohol, oil, injection. Widely used in food, pharmaceutical, chemical industries and scientific research.
This machine is built in the absorption of foreign advanced technology, based on independently developed by our company.
This machine is suitable for a variety of small doses of liquid filling & capping such as oil, injection. Widely used in food, pharmaceutical, chemical industries and scientific research.
Full compliance with the GMP requirements.
Main Features Of MIC-L40 automatic e-liquid bottle filling capping and labeling machine
1. Microcomputer setting, high filling accuracy
2. The main engine is equipped with stepless frequency speed control.
3. Automatic production capacity quantitative control.
4. With all kinds of fault alerting, for low pressure, no filling, no inner cap etc.
5. The machine can stop automatically in case of no filling, no inner cap etc.
Filling head
The bottle through the conveyor belt was sent to the location of the filling head, automatic identification of sensors, control by internal program to send signals for filling station, Start precise quantitative filling, filling process without dripping, do not waste material, also can ensure the bottle clean and tidy.
cover loading automatically
Cover feeding cage with vibrating disk is connected to a pipe that carries the outside cover ,They automatically arranges the outside cover ａnd deliver the outside cover.
In this way, the small bottle is covered in a Coherent process, reducing the manual contact with the syringe process, and ensuring bottle hygiene,At the same time, labor costs are reduced.
Bottle block air cylinder
When the bottle can reach a certain number, there is a special infrared sensor on the bottle track to receive the induction, and then automatically stuck behind the bottle, in front of the bottle after the bottle filling, and then let the behind the bottle to fill the vacancy, so as to achieve no bottle no filling
In short, we will try our best to provide you with satisfactory service,the following is our customer feedback:
Filling volume | 5-100ml |
Loading error | ≤ ±1% |
Rotation (rolling) Cover pass rate | ≥99% |
Production capacity | 30-50BPM |
60-90BPM | |
Power supply | 380V/50Hz |
Power | 2.0 kw |
Weight | 600 kg |
Dimension | 2000*1000*1500mm |
Name | Brand |
Press-button | Schneider |
Magnetic Contactor | Schneider |
Relay | Omron |
Frequency Transformer | Mitsubishi |
Motor | JSCC made in Germany |
Air Cylinder | Airtac |
Solenoid Valve | Airtac |
Speed Reducer | Made in Taiwan |
Bearing | NSK |
PLC | Mitsubishi |
Touch Screen | Mitsubishi |
Fibre-optical | Autonics |
Switching Mode Power Supply | NWELL |
Step Motor | SNAYO made in Japan |
Similar Product Recommend
