，-
E-mail
market@micmachinery.com
-
Phone
+8613083991987
-
Address
52 Longquanwan XueYan town, Wujin zone, Changzhou, Jiangsu, China. 213169
Product Categories
- Emulsifying Mixer
- Emulsifier Machine
- Emulsifying Machine
- Vacuum Emulsifier Mixer
- Vacuum Homogenizer Mixer
- Cosmetic Homogenizer
- Planetary Mixer
- Battery slurry mixing machine
- Planetary vacuum mixer
- Sealant mixing machine
- High Viscosity Mixing Equipment
- Vacuum Emulsifying Mixer
- Labeling Machine
- Bopp Labeling Machine (Hot Melt Glue Labeling Machine Fast Speed)
- Wet Glue Labeling Machine
- Syringe Labeling Machine
- Shrink Sleeve Labeler (Shrink Sleeve Cutting Labeling Machine Fast Speed)
- Vial Labeling Machine (Horizontal Labeling Machine Suits Syringe Tube Vials)
- Double Side Labeling Machine (Suits Box Carton Oval Square Bottle)
- Flat Bottle Labeling Machine (Flat Surface Bottle Box Pouch Bag)
- Other Types Of Labeling Machines
- Label Applicator Machine (Suits Bottle Can Tube Syringe Jar Flat Surface)
- Bottle Labeler (Suits Tube Jar Wine Bottle Box Beer Cans)
- Round Bottle Labeling Machine (For Round Bottle Labeling）
- Capping Machine
- Filling Machine
- Beer, wine, beverage filling machine
- Chemical products filling machine
- Cosmetic products filling machine
- Food products filling machine
- Medical products filling machine
CHANGZHOU MIC MACHINERY CO.,LTDFree·1YRS
Eye drops high speed vial filling machine
NegotiableUpdate on June 29
- Model
- Nature of the Manufacturer
- Other
- Product Category
- Medical products filling machine
- Place of Origin
- City, Province
Overview
Eye drops high speed vial filling machine
Product Details
The aseptic filling production line for eye drops is composed of six main parts: bottle arrangement, transportation, aseptic purification gas washing bottle, filling, inner stopper and outer cap. It is mainly used to complete the bottle arrangement, bottle transportation, gas washing, metering and sub packing, stopper, capping and capping of eye drops bottle. The whole production process is completed under 100 level laminar flow protection and aseptic isolation operation, The production line is also suitable for the production of other small capacity plastic bottles.
*Automatic bottle handling system
*Conveying bottle, removing bottle pouring system
*Static elimination, air washing bottle system (optional)
*Static electricity elimination, gas washing plug cap system
*Precision ceramics, filling and bottle dividing system (optional)
*Vacuum plug system
*Grab and cover system
*Constant magnetic torque, positioning and capping system
*100 level laminar flow protection aseptic system
Basic performance characteristics
1． Touch screen operation platform
2． Host frequency control, automatically display the current working frequency
3． The filling volume can be adjusted as a whole or fine-tuning
4． No bottle, no filling
5． If there is no bottle, there is no plug
6． No inner plug, no outer cover
7． The capping station is equipped with bottle clamping device and top cover device
eight Stop the machine when there is no bottle and start automatically when there is bottle nine When the rotary table clamps the bottle, the torque limiting device can stop the machine for protection
ten Equipped with a 60L liquid storage tank, two proximity switches on and off the floating ball in the liquid storage tank + angle valve control for automatic material replenishment (the liquid replenishment system of the liquid storage tank needs to be in the state of liquid replenishment when the main engine power is turned on, and after the power is turned off, the liquid replenishment system needs to be in the state of closed no matter how much the liquid level is)
Plastic cap screwing system
The motor transmits the power to the main shaft through the transmission device, so that the turntable rotates. Because the central gear does not rotate, the rotary cap rotates because of the rotation of the gear of the rotary cap shaft. The machine will automatically grab the cap, and the bottle will automatically screw the cap when it reaches the specified position,no bottle then no cover, when the rotation of the cap side moving down, rotation (pressure) cap under the action of the CAM to complete cover. Then by the drawing wheel into bottle delivery.
cover loading automatically
Cover feeding cage with vibrating disk is connected to a pipe that carries the outside cover ,They automatically arranges the outside cover ａnd deliver the outside cover.
In this way, the small bottle is covered in a Coherent process, reducing the manual contact with the syringe process, and ensuring bottle hygiene,At the same time, labor costs are reduced.
In short, we will try our best to provide you with satisfactory service,the following is our customer feedback:
Type | Bottle conveyoring → bottle feeding → bottle filling → loading inner stopper → loading outer Cap → outer Cap capping → bottle outlet by rotary table |
Filling volume | 5-10ml (can be customized) |
Filling speed | ≥130bpm |
Filling error | ≤±1% |
Pass rate | ≥99.9% |
Filling type | Ceramic pump or peristaltic pump |
Filling temperature | Room |
Air pressure | 0.4-0.6MPa；consumption 10-25L/min |
Power | 2.5kw |
Voltage | 380V/50/60hZ (can be customized) |
Weight | About 1500kg |
No. | Name | Type | Brand |
1 | Filling pump | Ceramic pump or peristaltic pump | China |
2 | Filling heads | Customized | China |
3 | Stopper heads | Customized | China |
4 | Capping heads | Customized | China |
5 | PLC | TM218LDA40DR2HN | Schneider |
6 | Touch screen | 3500 | Schneider |
7 | Frequency converter | ATV310H075N4A | Schneider |
8 | Main electrical components | / | Schneider |
9 | Main pneumatic components | / | Schneider |
10 | Main motor | 0.75KW | China |
11 | Reducer | WPDS70-20 | China |
12 | Conveyor motor | 200W 1:25 | China |
13 | 80 dividing box | 1：18 | China |
14 | Material of equipment keel | A3carbon steel | China |
15 | Main material | Cover is SUS304, liquid contacting parts SUS316L | China |
Similar Product Recommend
