Rotary thick syrup Filling Machine

The machine is combined with rinsing, filling and capping, which special designed for PET bottled. It is stable characteristic, advanced technology, nice appearance and complete function.

Technical structure feature:

A. Rinsing part:

☆ It is rotary type, mainly sued for rinsing new bottles send the bottles to the filling machine.

☆ Renew stainless steel clip, simple structure, convenient adjustment; small area touch with bottle mouth, avoid the secondary pollution for the bottle mouth efficiently.

☆ Bottle rinsing machine inlet pipe equipped with pressure gauge.

☆ Bottle rinsing machine equipped with water collector to callback rinsed water.

B . Sauce Filling part:

Sauce filling machine will play a role to fill the sauce products into the bottle; all the contact parts with the products are adopted stainless steel material and special materials, comply with food sanitary standard.

Filling valve is a key part of the machine, plunger-type ration filling valve is special used for filling solid state suspended substance products or high viscosity products. The valve is installed on the filling cylinder through positioning screw, pressure plate and pin position; the valve has two working positions: one is closed valve for the liquid inlet, with the function of opening and closing of valve idler wheel, the pilot valve drives operating loop running to the valve shut state, the valve nozzle is shut by operating loop, the plunger moves up with the drive of lifting idler wheel, the products in the filling cylinder is inhaled to the plunger valve cavity through the perforated hole of operating loop with cylinder; the other is filling with opening valve, with the function of opening and closing idler wheel, the operating shaft drives operating loop to opening valve state, the perforated hole of operating loop is closed, the plunger moves down with the drive of lifting idler wheel, the products in the plunger valve cavity are extruded, and filling to the container under the valve through perforated hole of operating loop; the adjustment of filling capacity will be achieved through the adjustment of elevator idler wheel, the valve of filling scope is 0~100ml; the contact parts with valve and products all adopt materials conform to the food sanitary requirements;

The machine adopts filling with no touch of bottle mouth.

C . Capping parts:

The capping rotates through reduction box drive rotational wheel, which make the cap leave the hopper with the function of centrifugal force. There is a separation device for right cap and reverse cap at the entrance, when the reverse cap passes, the cap automatically fall into and return to pipeline, and blow the reverse cap automatically to hopper through wind power. Only right cap could enter into skids smoothly, the volume of cap inside of hopper will be automatic inspected by electric switch to control cap conveyor, and that ensures best effect of cap down. When the right cap enters into the slide way, it could smoothly enter into cap feed plate, to prevent accidents, there is an anti reverse cap drive plate device to match with slide way, to ensure that the access to the cap feed plate is correct. The slide way is also equipped with a pair of photoelectric switch, when testing no cap, then an immediate halt to the host. In order to effectively remove non-anti-theft ring bad caps and cleanup additional caps in hopper, there is an active exit in front of the hopper exit can meet this function.

   In short, we will try our best to provide you with satisfactory service,the following is our customer feedback.