M9 M12 M15 M18 Fixed push-pull self-locking connector

Mechanical and electrical properties of :
The mechanical properties of thermoplastic materials (such as polyamide PA.6 and PEEK) can be improved by adding glass fiber. Adding glass fiber into the resin can not only improve its mechanical strength and radiation resistance, but also reduce its water absorption to improve its insulation strength.

Selection of insulating materials for M9 M12 M15 M18 fixed push-pull self-locking connector:
Thermoplastic materials have common characteristics, some of which are the same as other insulator materials. Therefore, the selection of insulator materials is based on the different properties of thermoplastic materials in specific indicators, so as to meet the requirements of different types of connector indicators.

Technical features of M9 M12 M15 M18 fixed push-pull self-locking connector:
Insulation strength: Peek (19-25kv / mm).
Volume resistivity (23 ℃, relative humidity 50%): PA.6 (5.8 * 10 cm)
Thermal conductivity: PTFE (0.23W / K.M).
Relative electric trace index (CTI): Peek (CTI 150V).
Maximum continuous working temperature: pa6.6-120 ℃, peek-250 ℃, ptfe-260 ℃, fep-200 ℃, pi-350 ℃.
Maximum short-time working temperature: pa6.6-150 ℃, peek-300 ℃, ptfe-300 ℃, fep-260 ℃, pi-480 ℃.
Water absorption (24 hours, 23 ℃): pa6.6 < 0.7%, peek < 0.3%, PTFE < 0.01%.