m5 female 90° angled DIP connectors

The features of m5 female 90° angled DIP connectors :
1.m5 female rear panel-mount,front panel lock nut fastened.
2.90° angled DIP PCB type.
3.Recommended installation sequence: Install the connector before welding the PCB board
4.The thickness of the panel cannot exceed 3mm
5.Number of contacts: 2pins (only for power connectors), 3 pins, 4 pins
6.O ring (waterproof washer) material and color are optional
7.With shielded and grounded

The core parameters of m5 female 90° angled DIP connectors
Standard:  IEC 61076-2-105
Interface standard  m5*0.5mm interface
Coding     No
Ambient temperature:  -25℃ ~ +85℃
Connector insert:  TPU or PA66+GF
Connector contacts:  Brass with gold plated
Coupling nut/screw:  Brass with nickel plated
Seal/O-ring:  Epoxy resin
Insulation resistance:  ≥100MΩ
Contact resistance:  ≤5mΩ
Shielding：  choosable
IP rating:  IP67 or IP68 in locked condition
Coupling :   Threaded coupling
Termination:    Solder
Mechanical operation: > 500 mating cycles
Cable diameter: ≤ φ3.3mm
Number of Contacts:  3pin,4pin
Rated Voltage: 60V
Rated Current: 1A
Contact Resistance: <5mΩ
Insulation Resistance: >100MΩ
Pollution Degree: 3
Nom Pin φ 0.48±0.03
Wire Gauge  max 0.14mm2/max 26AWG
Cable Jacket  PVC or PUR
pin contact  CuZn
Socket contact CuZn
Contact plating  Au