M5 circular sensor connector

The features of M5 circular sensor connector
Standard:  IEC 61076-2-105
Interface standard  m5*0.5mm interface
Coding     No
Ambient temperature:  -25℃ ~ +85℃
Connector insert:  TPU or PA66+GF
Connector contacts:  Brass with gold plated
Coupling nut/screw:  Brass with nickel plated
Seal/O-ring:  Epoxy resin
Insulation resistance:  ≥100MΩ
Contact resistance:  ≤5mΩ
Shielding：  choosable
IP rating:  IP67 or IP68 in locked condition
Coupling :   Threaded coupling
Termination:    Solder
Mechanical operation: > 500 mating cycles
Cable diameter: ≤ φ3.3mm
Number of Contacts:  3pin,4pin
Rated Voltage: 60V
Rated Current: 1A
Contact Resistance: <5mΩ
Insulation Resistance: >100MΩ
Pollution Degree: 3
Nom Pin φ 0.48±0.03
Wire Gauge  max 0.14mm2/max 26AWG
Cable Jacket  PVC or PUR
pin contact  CuZn
Socket contact CuZn
Contact plating  Au

Notes for m5 circular sensor connectors:
1.About coding,there is only one standerd  type coding for m5 connectors.If multiple M5 connectors are used on the same device,so need more coding.the new coding need design the mold.

2.About the number of contancts.Standard M5 connectors only have 3pins and 4pins.In the same of number of contacts,2pins or single pin can also be used,but the current and voltage are  same as 3pins and 4pins.If needs more heavy current or high voltage,so the contanct insulator needs design again.

3.About Mechanical operation.Use different technologies,the M5 connector can be plugged more than 1000 times, but the corresponding rated current will be reduced.

4.About the waterproof grade.Say waterproof grade commonly, it is to point to plug to take line and socket to be in plug close when.There are many factors affecting the waterproof grade.