M8 automation equipment connector

Pin of characteristics:

Welding needle Pin:

1. Do not need specific tools, just need electric soldering iron

2. Especially suitable for very small and brittle  core of cable

3. The opening of the needle core has a welding cup, which can make the solder flow fully

Crimping pin :

1. Practical and fast fixing pin core, and operating outside the insulator

2. It can be used at relatively high temperature

3. Need to buy special tools

4. The insulator will not be heated in the process of crimping the pin core like welding

5. High tensile strength

6. Complete and thorough lead-free solution

Board pin :

1. Make PCB more solid and reliable

2. Reduce damage to PCB caused by equipment vibration

3. Realize signal transmission in dense space equipment

Material and specifications of m8 automation equipment connector :
Coupling Threaded coupling
Shell material Brass nickle plated
Insert material PA66+30%GF
Contact material copper(silver /gold plated)
Termination Soldering
Mating cycle 500
Temperature Range -25℃ ～+85℃
Cable diameter ≤ φ3.3-5.0mm

 Specification of M8 automation equipment connector

Number of Contacts                   3,         4,        5,               6,       8
Rated Voltage                                      60V                           30V
Rated Current                                       4A                            1.5A
Contact Resistance  <5mΩ
Insulation Resistance  >100MΩ
Pollution Degree  3
Temperature Range  -20℃ to +85℃
Degree of Protection  IP67 when mated
Mating Times  100 cycles
Nom Pin φ                                        1.0±0.03                      0.8±0.03
Wire Gauge                                         24AWG                       26AWG
Cable Jacket  PVC or PUR 
Material of Housing  Brass Nickel Plated
Material of lnsertion  PA66+GF UL94V-0
Material of Contact   Male Brass/Female Phosphor Bronze ,Gold Plated