-
E-mail
fuwu@fh-sd.com
- Phone
-
Address
Feihong Innivation Park,Rencheng District,Jining City ,Shandong Province,China
Membership
Help
Shandong Feihong Engineering Machinery Co., Ltd.Free·1YRS
fuwu@fh-sd.com
Feihong Innivation Park,Rencheng District,Jining City ,Shandong Province,China
1.The base of the machine tool is wide, and the structure of the bed guide rail is reasonable, which more effectively improves the stability of the machine tool and the stability of the spindle.
2.The main shaft of the machine tool adopts high-precision matched and combined bearings, which have good stability and large load during operation.
3.The guide rail is made of wear-resistant cast iron and has been artificially aged for 48 hours to ensure long-term stable processing accuracy and service life.
4. The main shaft adopts three manual gears, which realizes stepless speed change in each gear and ensures high torque output, which meets the processing requirements of most products.
5.The high-precision ball screw pair adopts a three-point pre-tensioning structure, high-precision pre-tightening nuts, and high transmission accuracy, which can ensure small mechanical errors for a long time, and make the screw twist and deformation caused by frequent high-speed positioning and heavy cutting reduced to a minimum.
6.High-precision coupling, no slip at high speed and high torque.
7.Independent lubricating system design of the bed to ensure the durability of the moving parts.
8.The control cabinet adopts a fully sealed device, which is completely isolated from dust and water vapor, and the computer system and circuit parts are kept dry and dust-free, durable;
9.The machine tool adopts fully enclosed protection, with beautiful and pleasant appearance, excellent waterproof performance, and the sliding door can be opened freely, which is flexible, convenient, safe and reliable.
1.The base of the machine tool is wide, and the structure of the bed guide rail is reasonable, which more effectively improves the stability of the machine tool and the stability of the spindle.
2.The main shaft of the machine tool adopts high-precision matched and combined bearings, which have good stability and large load during operation.
3.The guide rail is made of wear-resistant cast iron and has been artificially aged for 48 hours to ensure long-term stable processing accuracy and service life.
4. The main shaft adopts three manual gears, which realizes stepless speed change in each gear and ensures high torque output, which meets the processing requirements of most products.
5.The high-precision ball screw pair adopts a three-point pre-tensioning structure, high-precision pre-tightening nuts, and high transmission accuracy, which can ensure small mechanical errors for a long time, and make the screw twist and deformation caused by frequent high-speed positioning and heavy cutting reduced to a minimum.
6.High-precision coupling, no slip at high speed and high torque.
7.Independent lubricating system design of the bed to ensure the durability of the moving parts.
8.The control cabinet adopts a fully sealed device, which is completely isolated from dust and water vapor, and the computer system and circuit parts are kept dry and dust-free, durable;
9.The machine tool adopts fully enclosed protection, with beautiful and pleasant appearance, excellent waterproof performance, and the sliding door can be opened freely, which is flexible, convenient, safe and reliable.
Model | FH6163A | |
The maximum turning diameter on the bed | 630mm | |
Maximum processing length | 1850mm | |
cutting diameter | Ф630mm | |
The maximum turning diameter on the tool holder | Ф350mm | |
X middle pallet width | 400mm | |
Bed upper rail width | 550mm | |
Spindle end | D-11/A2-11 | |
Spindle through hole diameter | 105mm | |
Manual third gear Headstock | Spindle speed range | 30-1000r/min |
Spindle speed series | Continuously variable speed in each gear | |
Main motor output power | 11kw | |
Chuck | Chuck Diameter/Form | Ф315/manual |
Z direction minimum moving unit | 0.001mm/min | |
X direction minimum moving unit | 0.0005mm/min | |
Z travel | 2000mm | |
X travel | 360mm | |
X direction rapid movement speed | 5000mm/min | |
Z direction rapid movement speed | 8000mm/min | |
Tailstock sleeve diameter | 100mm | |
Tailstock sleeve tapered hole | Mohs 5 | |
Maximum stroke of tailstock sleeve | 250 mm | |
Z-axis repeat positioning accuracy | 0.015mm | |
X-axis repeat positioning accuracy | 0.01mm | |
Electric tool post repeat positioning accuracy | 0.002mm | |
Workpiece weight | 2 T | |
Machine weight approx. | 5000kg | |