Welcome Customer !

Membership

iangsu Zhongwei Measurement and Control Co., Ltd.
Free Member ·1YRS
Other

Main Products: 流量计

Xwboo>Products
Product Categories

iangsu Zhongwei Measurement and Control Co., Ltd.Free·1YRS

  • E-mail

    zhongweick@163.com

  • Phone

    0517-86918678

  • Address

    No. 4-4 East West Road, Jinhu County Industrial Concentration Zone, Huaian City, Jiangsu Province

Contact Now

Furnace tube blade thermocouple

Model
Nature of the Manufacturer
Other
Product Category
Thermocouple
Place of Origin
City, Province
Overview
Furnace tube blade thermocouple
Product Details
Description:

Productoverview:
WRNK-231D series Furnace tube blade thermocouple The blade type joint directly welded on the surface of furnace pipe for petroleum industrial furnace tube, the tower wall surface temperature measurement. Is the necessary temperature measuring device of refinery distillation tower. Is a special instrument of chlor alkali industry.
Two, work principle:
WRNK-231D series Furnace tube blade thermocouple Two different components of the conductor (called thermocouple wire or thermal electrode) is connected to the two ends of the synthetic circuit, when the junction temperature at the same time, in the loop will produce electromotive force, this phenomenon is called the thermoelectric effect, and this is called thermal electromotive force emf.
WRNK-231D series Furnace tube blade thermocouple The temperature is measured by this principle, which is directly used for measuring the temperature of a medium called the working end (also known as the measuring end), the other end is called the cold end (also known as the end of the cold end compensation); and display instrument or meter display instrument connection, will point out that the thermoelectric potential generated by thermocouple.
Three, main features:
1, simple assembly, convenient replacement;
2, the pressure spring type temperature sensing element, good anti vibration performance;
3, large range of temperature measurement;
4, high mechanical strength, good pressure resistance.
Four, technical parameters:
1, electrical outlet: M20x1.5, NPT1/2;
2, accuracy: I, II;
3, protection grade: IP65;
4, nominal pressure: 10MPa.

Five, installation method:

1, first of all should be measured or the screw thread of the thermocouple flange size, supporting flange or thread processing base.

2, according to the size of the base flange or threaded hole in the pipe, to be measured.

3, the flange or the screw tooth of the welding. The flange or thread is inserted has opened hole in the flange or threaded seat base and pipeline measured welding.

4, the thermocouple with bolts or screw threaded into the base has been welded.

5, according to the wiring diagram to the thermocouple junction box connection, and display instrument is connected on the dial corresponding. Connection box can not contact with the wall of the measured medium pipeline, ensure the junction box temperature not exceeding 100 DEG C. Outlet hole junction box should prevent due to poor sealing, water vapor dust deposition caused by short circuit terminal.

Six, Type and specification table:

ModelGraduationThe measuring range of CProtection tube materialThermal response timeSpecifications
DL
WRNK-231DK0-1000GH3030446SSLess than 10SPhi 8 Phi 12.7One thousandOne thousand and five hundredTwo thousandThree thousand
0-8001Cr18Ni9Ti

Note: 1, Thermocouple I according to the ordering protocol;
2, the remaining material according to the ordering protocol protection tube.
Seven, Design selection and ordering information:
1, model;
2, division no.;
3, precision grade;
4, protection tube material and form;
5, the length or depth of insertion.
Customer service service commitment:
1, my company sold Zhongwei Thermocouple series The product within twelve months of quality problems, responsible for free maintenance.
2, the warranty period if the products of our company have any quality problems, our company is responsible for free repair or replacement.
3, the warranty period if the user use undeserved, cause damage to the product, our company is responsible for the maintenance, collect the damaged parts cost.
4, after the warranty period of product quality problems, our company is responsible for the maintenance, collect the damaged parts cost.
5, if the user needs to our service, our company in the province of the user service personnel arrived at the scene within 12 hours, arrived at the scene 48 hours outside users.



Similar Product Recommend