Chain wheel type dark plate knife gate valve

A gate valve, an overview:

PZL73 series chain wheel dark plate knife type gate valve for flat plate structure, and pipe connected to the clip, the gate is a single gate, and one side of the body seat sealing, back and body side wedge contact between the sealing surface, with the direction of medium relative. The wedge shaped contact structure is in the sealing surface on the back are provided with wedge pressing block, the other side of the valve body is arranged corresponding to the pressing block adjusting screw.

PZL73 series chain wheel dark plate knife type valve body structure with short length, light weight, the valve seat sealing surface against medium erosion, sealing surface, uniform compression joint is tight in the closing process, the valve seat sealing surface of the dust and tar scraped away and the sewage is convenient, prevent leakage of medium etc.. Suitable for use in gas containing dust or tar in.

PZL73 series Chain wheel type dark plate knife type valve Is a new variety of valve, small volume, light weight, light material, is an ideal product for sewage, coal slurry, syrup, mud, air, water, slag mixture water, papermaking, mining and other industries. Knife gate valve with the metal to metal seal, or the use of metal to rubber soft seal. In the process of opening and closing the gate, and the sealing surface of the special design, less friction, durable.
Two, Chain wheel type dark plate knife type valve Product features:
1, ultra short length structure saves the material, can make the whole pipeline system greatly reduce weight
2, small occupied space, can effectively support the pipeline strength, can reduce the possibility of pipeline vibration
3 gate, the selection of austenitic stainless steel, corrosion resistant performance is greatly improved, which can effectively prevent the gate seal leakage caused by corrosion
4, packing with flexible PTFE, reliable sealing, flexible operation
5, the gate with the knife, can effectively brake off all kinds of debris in the medium
Three, Chain wheel type dark plate knife type valve Technical parameters:
Nominal pressure: 0.6MPa, 1.0MPa, 1.6MPa, 2.5MPa, 150Lb
Nominal diameter: DN50-1200mm NPS 2 "-20"
Suitable temperature: -38-+650 degrees (the specific temperature range as the sealing material and the properties of the media set)
Flange: ANSI B16.5, GB/T9113, JB/T79, HG, SH, JIS, DIN, NF, BS
Main material: WCB, ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, CF8, CF8M, CF3, CF3M
Seal type: hard seal, soft seal
Leakage: Seal: D (liquid level 0.1 * DN mm3/s): a soft seal (zero leakage)
Suitable medium: syrup, pulp, sewage, slurry, coal ash and slag water mixture
Accessories: mounting flange
Four, Chain wheel type dark plate knife type valve Install and use:
1, the installation must be inspected before the valve cavity and the sealing surface and other parts, there is dirt or sａnd does not allow attachment;
2, all bolts evenly tightened requirements;
3, check the packing requirements of pressed parts, both to ensure the tightness of packing, but also to ensure the open and flexible plate;
4, the user must check valve type before installing the valve, connect the flow of medium size and attention to ensure consistency with the requirements of the valve;
5, the user to install the valve, must be necessary to install the valve drive space dying;
6 wire drive device shall be carried out according to a circuit diagram;
7, the valve must be regularly maintained, not free to collision and extrusion, so as not to affect the sealing performance.
Five, the main performance specifications:

Six, main parts material:

Seven, appearance structure diagram and the main external and connecting dimensions (mm)

Nine, ordering:
1, please carefully before ordering the understanding of the product chain sprocket type dark plate knife gate valve, clearly marked specifications, types and materials, pressure, quantity.
2, the occasion is very important when using more complex or the environment when you try to provide design drawings and detailed parameters by Zhongwei control of our experts audit checks for you.
3, order the knife type valve, please fill out the order with the unit, receiving unit, the name of the payment unit, address (including the provincial, city, District, street, and No.), telephone, bank account, and representative.
4, the company's products are all order cash on delivery or delivery.
Ten, inspection (unloading) notice:
1, carefully controlled products and order (the dark plate type sprocket knife type valve) is the same, and there is no breakage of packing box.
2, choose suitable methods and tools, to prevent deformation or damage of the product; our company attaches great importance to the service, in order to achieve customer satisfaction product standards we have with the customer side by side, share experiences, information, commitment, goal, in cooperation between the development of excellent products. Whether you ask the product design principle, technology, price, schedule, transportation routes and any other problem, have specific customer service staff to answer your questions.