-
E-mail
rbzg@rbqlty.com
-
Phone
13855367553
-
Address
Ma'anshan City
Membership
Help
Anhui Runbang Heavy Industry Machinery Co., LtdFree·1YRS
rbzg@rbqlty.com
13855367553
Ma'anshan City
Features
1.This cutting machine is widely used in cutting sheet metal to various size and shape.
2.This cutting machine adopts gantry type structure,double driving and linear guide,plasma cutting
3.Torch number is set according to customer' request. Cutting plate is normally 1-60mm thick.
Gantry structure double driving increase the work stability and accuracy; double lifting devices makes operation simple and smoother.
4.The whole wedding thick square steel tube with artificial aging processing frame.
Reasonable working table design, covered with finishing cating iron mask to protect the vertical steel plate.
5.Reasonable slope design to ensure the processed workpiece
Adopted with Japanese Panasonic motor servo driver and Taiwan made high-precision servo gear,rack and pinio to ensure low noise, steady and precision performance.
6.Adopted with US made control system with Germany auto-saving material auto-layout software.
Equipped with HYPERMAX powermax series cutter machine and US original torch.
7.Applications:Metal parts cutting, thick abnormal metal plate cutting and welding processing.
All kinds of metal materials such as steel, copper, aluminum and stainless steel can be processed.

2.Detailed images


3.diagrammatic sketch
1)The longitudinal rail of the gantry cutter needs to be mounted on a solid base.The usual bases are like cement bases and I-steel bases shown in Fig. 1-1.The center distance of the foundation is the same as the span of the gantry cutting machine ordered.
Guide rail diagram

2)Not only each column guide rail straightness and levelnesshave to be kept, but also 2 columns of guide rail center distance and mutual level have to be ensured when installation.Center distance of the two columns of longitudinal guide rails are consistent with the transverse span.
The part 6 is welded with the base plate, part 2 sealed with part 6, part 1 is to adjust the high& low and level, part 5 is to adjust the center distance and straightness of gauge.When the adjustment is over,to tighten screw 3 then press gauge tightly trough part 4.
