Welcome Customer !

Membership

Dongguan Gangfeng Precision Industry Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 冲床

Xwboo>Products

Dongguan Gangfeng Precision Industry Co., Ltd.Free·1YRS

  • E-mail

    yewu@gfsino.com

  • Phone

    +86-0769-81003226

  • Address

    Building B, No. 626, Dadong Road, Dazhou Community, Qiaotou Town, Dongguan City

Contact Now

Servo Micro Punch Servo Punch GF-6

Model
Nature of the Manufacturer
Other
Product Category
GF series precision punch
Place of Origin
City, Province
Overview
Product Details

The servo press uses the servo motor as the direct power source, and converts the driving force generated by the motor into the linear motion of the slider through the screw, crank connecting rod and toggle lever, etc., using the programmable control characteristics of the servo motor, Perfectly control the motion form of the slider to meet the diverse and intelligent requirements of stamping processing, and has the advantages of controllable slider speed, ease of forming difficult-to-form materials, energy saving and environmental protection, multi-purpose and intelligent. Three generations of punch presses are the mainstream trend in the development of the stamping industry.

Servo punches are mainly used in production lines such as drawing, blanking, bending, cold forging and imprinting, as well as try-out punches. Due to PLC control, digital technology and feedback control method are used to achieve high-level precision control: not only can the position of the punch slider be controlled, but through the monitoring system and compensation control, the position repeatability control accuracy of the slider is ±0.01mm; Using program editing, the speed and trajectory of the slider can be controlled, which greatly reduces the speed of the stamping area, reduces the noise and vibration of the stamping, improves the working environment of stamping, and prolongs the service life of the die; at the same time, it can also control the output force of the slider. Control, the control accuracy can reach ±1.6% of the maximum output force of the slider. Therefore, it is possible to form large-scale covering parts using high-strength steel plates and aluminum alloy plates in auto manufacturing; difficult-to-form materials such as magnesium alloys, aluminum alloys and titanium alloys, combined with mold design and peripheral system control, make new materials easy to form.

Advantages of using servo presses in stamping production:

1. The reduction ratio of the reduction mechanism is adopted to increase the required speed of the motor and reduce the required torque of the motor. With the labor-saving linkage mechanism, the required power of the servo motor can be reduced to less than 40% of the direct drive type, so as to achieve the purpose of energy saving.

2. The use of labor-saving connecting rod can effectively amplify the torque input by the servo motor (input end) at the point where the capacity occurs, through the special connecting rod angle and structure, so as to meet the demand of the stamping (output end) torque.

3. The flywheel and clutch brake are eliminated, which simplifies the structure, so the power consumption is greatly reduced. Energy saving can reach 30%~60%.

4. The speed of the slider can be controlled and adjusted during the stroke, so the slider is controlled in the middle of the stamping section to make it stop, and the speed when it enters the sheet is reduced, so as to achieve the purpose of reducing noise. Usually, the noise reduction effect can be improved. up to about 10 decibels. In addition, it can reduce the impact when the slider enters the sheet, thereby prolonging the service life of the mold.

5. The stroke and speed of the slider can be adjusted arbitrarily. It can be programmed to set the forming action close to the bottom dead center as the slow speed, and the speed before the processing area and the separation after the forming is the fast movement. In this way, even if the speed of the processing area is slowed down to the ideal speed for forming, the production efficiency can be improved by about 1/3 compared to the past.

Product Features:

GF series of small table-top three-round guide post high-speed precision punch presses have precision and high stability. It has the superior performance of high and low speed noise.

1. The machine body is made of high-strength cast iron, the warp shaft is less deformed by force, and the bearings are imported high-precision bearings;

2. The crankshaft support is specially designed, the crankshaft is subject to small force and deformation, and the bearing adopts imported high-precision bearings;

3. The slider body is made of ductile iron, which has been quenched and tempered. The slider movement adopts the structure of double long guide columns combined with a large central guide column, which has strong bearing capacity and high running accuracy;

4. Slider automatic locking function (special model)

5. The reverse side load dynamic balancing device can effectively balance the vibration of the punching machine during high-speed operation and reduce the noise of the punching machine;

6. Pneumatic clutch brake system, reliable operation, forced circulation of lubricating oil device, to ensure stable precision of high-speed operation of the machine, extremely low wear of the machine, and long service life of the machine;

7. The humanized design of the whole punching machine, electronic monitoring system, can self-diagnose mechanical abnormal conditions, and display it on the screen.

Standard accessory configuration
Counter 1 group
Dry pneumatic clutch brake 1 group
Electronic cam construction 1 group
Inverter control 1 group
Manual mold height adjustment 1 group
Circulating lubrication oil supply system 1 group
Air source receptacle 1 group
Maintenance tools and toolboxes 1 group
Operating instructions and precision 1 group
Standard accessory configuration
Photoelectric protection configuration 1 group
Misfeed detection configuratior 1 group
Ocerload protection device 1 group
Automatic airblower 1 group
Roller feeder 1 group
Flat feeder 1 group
Precision Straightener 1 group
Oil pressure locking system 1 group
Irem/Model GF-5A GF-10A GF-15A
nominal force 5T 10T 15T
Rated tonnage point 0.6 0.8 0.8 1.0 1.0 1.2
Stroke 20 30 40 50 20 30 40 50 60 20 30 40 50 60 70
Speed changing 200-
350
150-
300
150-
250
150-
200
200-
350
150-
300
150-
260
150-
220
150-
200
200-
350
150-
300
150-
270
150-
240
150-
210
150-
200
Die height 160-
190
155-
185
150-
180
145-
175
190-
220
185-
215
180-
210
175-
205
170-
200
200-
330
195-
225
190-
220
185-
215
180-
210
175-
205
Slide area 200x160 250x200 260x205
Moid mogniSeihgleofupper 180mm 220mm 220mm
Bolster area 340x240x40
(lengthxwidthxheight)
430x250x40
(lengthxwidthxheight)
480x300x45
(lengthxwidthxheight)
Hole size of the filling 160x75 180x100 200x100
Slide Adjustment 30 30 30
Main motor 1.1 1.5 2.2
Dies can be installed Hanging mode Hanging mode Hanging mode
Modulation mode Manual Manual Manual
Strokemm type Inching/route/continuous
Air pressure in use 5 5 5
method of operation Bimanualness method Bimanualness method Bimanualness method
Fuselage(lengthxwidthxheight) 950x700x1680 1150x850x1870 1150x850x2000
Presses colour Standard creamy white Standard creamy white Standard creamy white
presses Weight 640kg 1000kg 1300kg
model A B C D E F G H I J K M N
G F-5A 958 1693 515 500 600 380 570 285 190 120 240 480 60
G F-10A 1100 1840 460 650 750 480 715 390 180 125 250 600 70
G F-15A 1152 1962 530 670 790 540 730 425 195 150 300 660 75