Welcome Customer !

Membership

Shandong Yasheng Heavy Industry Co, Ltd
Free Member ·1YRS
,
Other

Main Products: 数控机床

Xwboo>Products

Shandong Yasheng Heavy Industry Co, LtdFree·1YRS

  • E-mail

  • Phone

    400-050-9488

  • Address

    4399 Yian'an Avenue, Gaomi City, Shandong Province

Contact Now

XK (H) 28 series of CNC moving beam moving column gantry milling machine, machining center

Model
Nature of the Manufacturer
Other
Product Category
Place of Origin
City, Province
Overview
XK (H) 28 series of CNC moving beam moving column gantry milling machine, machining center
Product Details



XK (H) 28 series of CNC dynamic beam moving column gantry boring and milling machine, machining center

● Introduction to machine tools The overall structure of the machine The series of machine tools for the bed, table fixed. The carriage is connected to the column and the beam can be moved vertically along the column guide to form a stable gantry frame. (X-axis); sliding plate along the beam guide rail to do horizontal movement (Y axis), the ram in the slide to do vertical movement (z axis). The beam moves vertically along the column guide (w axis).

 ● Basic parts of the process of protection Machine basic parts by the bed. Workbench, left and right columns, beams. Slide plate, ram and other major components. Machine large pieces for the HT250-_30. High-quality alloy wear-resistant cast iron, by the vibration of a hot furnace aging a vibration aging a roughing a vibration aging half of the finishing a heat furnace aging a vibration aging a finishing made to eliminate the workpiece stress. To ensure long-term operation accuracy of the machine.

● Ram - type milling and boring head Slip - down gear box separation design. The gearbox is two-gear automatic transmission. To obtain low speed high torque and high speed constant power. Meet the rough, finishing requirements.

 ● Beam up and down Left and right column were equipped with w to the feed motor, detection scale, with synchronous control function. To ensure that the beam feed to achieve dual drive synchronization control.

 ● Guide form

1) X axis: the use of long pump oil supply constant current closed static pressure guide. Heavy load capacity.

2) Y axis: the use of long pump oil supply constant current closed static pressure guide. Stability and strong.

3) Z axis: Sliding rails for the plastic sliding guide rails. Friction coefficient is small and so on.

4) W axis: guide rail for the plastic sliding rail, lubrication for the quantitative quantitative lubrication method.

 ● Control System Machine tools can be based on different requirements of users, matching Siemens, Fanuc, Fuga, Mitsubishi and other numerical control system, the use of encoder to achieve semi-closed-loop position feedback, but also according to user requirements, the use of grating to achieve full closed loop position feedback. To improve machine accuracy. ● Knife library Optional capacity of 20, 24 tool set of disc magazine, to achieve vertical automatic tool change, or capacity of 50, 60, 80 for vertical and horizontal automatic tool change (user optional).


If there are questions welcome to inquire: Qi: