Welcome Customer !

Membership

Winsun Automation Instrumentation Co.Ltd.
Free Member ·1YRS
WuXi,JiangSu
Manufacturer

Main Products: Transducer|Temperature Sensor|Level Transmitter

Xwboo>Products
Product Categories

Winsun Automation Instrumentation Co.Ltd.Free·1YRS

  • E-mail

    wenshengltd@126.com

  • Phone

    86-510-86023568

  • Address

    108# Binhu road, Wuxi, Jiangsu, China

Contact Now

WSLC type oval gear flowmeter

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
WSLC type oval gear flowmeter
Product Details

WSLC type oval gear flowmeter

Overview

We have an independent product design and manufacturing system that can provide a variety of materials, calibers and connections, as well as converters, display instruments and flow computers.

The working principle of the elliptical gear flowmeter is that the liquid pushes a pair of elliptical gears to rotate; the volume of each cavity is a fixed volume; the gear speed is extracted, the sensor sends a synchronous pulse count, and the elliptical gear rotates through the magnetic seal coupling and the transmission speed reduction mechanism Passing to the counter directly indicates the total amount flowing through the flow meter. If the sending device is attached and then equipped with an electric display instrument, the remote transmission is only instantaneous flow and cumulative flow.

Typical application :

Oval gear flowmeter is mainly used to measure high viscosity media. Its products are widely used in petroleum, petrochemical, natural gas, chemical, paper and other industries to measure small flowmeters of small diameters.

The main advantage:

  • The caliber is from 10 to 150 mm ;
  • Available in a variety of housing materials: aluminum, stainless steel and medium and high pressure stainless steel, PPS , bronze
  • Wait;
  • There are many choices of bearing materials: ceramic, bronze, Hastelloy, carbide, PPS , Stainless steel, etc.
  • Shaft material: 316 stainless steel;
  • O -rings are available in VITON , fluoroelastomer, stainless steel and Teflon;
  • The range ratio is 10 : 1 and the maximum is 50 : 1 ;
  • The accuracy is ±1% and ±0.5% , and the repeatability is ±0.03% ;
  • Straight pipe section requirements for installation: 5D + 3D , need to install a filter;
  • Viscosity up to 1,000 000 CP ;
  • Pressure rating up to 551bar ;
  • Temperature resistance up to -10~80 °C;

Technical performance characteristics

model

caliber

Minimum flow

Maximum flow

Accuracy level

Working pressure ( Mpa)

WSLC—8

8

0.04

0.4

0.5,0.2

1.6,2.5,4.0,6.4

WSLC—15

15

0.16

1.5

WSLC—20

20

0.3

3

WSLC—25

25

0.6

6

WSLC—40

40

1.5

15

WSLC—50

50

2.4

24

WSLC—80

80

6

60

WSLC—100

100

10

100

WSLC—150

150

12

120

The characteristics of the elliptical gear flowmeter

The flow measurement is independent of the flow state of the fluid because the elliptical gear flow meter is metered by the rotation of the elliptical gear by the indenter of the measured medium. The larger the viscosity of the medium, the smaller the leakage amount from the gear and the metering gap, so the larger the stickiness of the nuclear medium, the smaller the leakage error, and the better the measurement. The elliptical gear flow meter has high metering accuracy and is suitable for the measurement of high viscosity medium flow, but it is not suitable for fluids containing solid particles (solid particles will jam the gears, so that the flow cannot be measured). If the liquid to be tested is contaminated with gas, it will also cause measurement errors. The elliptical gear flowmeter is a type of volumetric flowmeter for precise continuous or intermittent measurement of the flow or instantaneous flow of liquid in a pipe. It is especially suitable for flow measurement of high viscosity media such as heavy oil, polyvinyl alcohol and resin.

The working principle

The working principle of the elliptical gear flowmeter The measuring part of the elliptical gear flowmeter is mainly composed of two intermeshing elliptical gears and their outer casing (metering chamber)

Model representation

Specification model

1

2

3

4

5

6

Description

Nominal diameter

counter

Nominal pressure

feature

Transmitter

Operating temperature

WSLC

Representation: oval gear flowmeter

8

Nominal diameter is 8mm

15

Nominal diameter is 15mm

25

Nominal diameter is 25mm

40

Nominal diameter is 40mm

50

Nominal diameter is 50mm

80

Nominal diameter is 80mm

100