3HP Spindle Power Motor Turret Vertical Milling Machine For Electronic Parts

Turret milling machine Taiwan original milling head

1. HT-250 resin sａnd is used for the body casting material and other large parts, and the table is HT-300

resin sand. The surface hardness of the Joint milling machine worktable and guide surface should be

increased from HRC-45 to 48 degree.

2. Machine body wall thickness (measured) 12MM.

3. Imported from Taiwan original milling head, Japan NSK P4 precision and spindle bearings, high precision

spindle, spindle tolerance within 0.003mm.

2. Spindle tolerance measured is less than 0.005mm, and Joint standard is 0.02/300, and full travel is less

than 0.04mm. The standard of Joint milling machine is 20% higher than industry.

3. Suitable for electronic parts, holes, slots, frame and mold processing.

4. Spindle tolerance:0.002mm