Automated CNC Lathe Milling Machine 70mm Through Spindle Hole With Waterproof Metal

70mm Through Spindle Hole Flant Bed CNC Lathe Machine CKI6140 With Tailstock

Quick details:

1. Adopt integral bed structure. The high water retaining edge makes the rigidity of the entire machine tool very good and the machine tool has a strong waterproof performance.2. The through hole of the main shaft is increased to 70mm.

3. The main shaft is waterproofed in three ways. All the main shafts are balanced. This makes the rigidity of the main shaft very good. The shaft does not shake and the part finish is very good. The main shaft does not enter the water and the stability of the main shaft is very stable. it is good.4. Through a wider width of the guide rail is 340mm, widened and thickened large pallets, the pallets are eaten on the double-triangular guide rails, and the underside of the pallets are combined with the guide rails with an integrated panel-type pressure plate before and after, so that the pallets are Very rigid.5. Machine pallets, all plastic strips, better wear resistance.6. The whole bed body is equipped with fully enclosed sheet metal, with excellent waterproof performance and convenient chip removal.

Product advantage1. Adopting the 980TDICNC system, in addition to the traditional RS-232 interface, it supports U disk transmission, speeding up the program transmission speed. The operation is also more convenient.2. The servo motor adopts a wide number of motors, which has the characteristics of large torque and fast response.3. Guide rails and ball screws adopt a centralized automatic lubrication system, which can periodically and quantitatively inject oil to each lubrication part to ensure uniform lubrication of each moving surface, effectively reducing frictional resistance, improving movement accuracy, and ensuring the use of guide rails and ball screws. life.4. The machine tool adopts full-closed protection to ensure the personal safety of the workers during the process, and the coolant and iron chips in the process are safely and fully recovered to ensure the clean and tidy work place.Specification Of Flat Bed CNC Lathe Machine CKI6140

Standard Accessories:GSK 980TDiController system, servo motor and drivingCutting fluid systemWorking lightSpindleAuto lubrication system

Machine coverOperation unit4 position electronic turret+3 jaw chuckLeveling pad

Manual tailstock

Tools and toolbox

Technical documentsOptional accessories:3 jaw hydraulic chuck

Auto feed bar