ShenZhen，GuangDong-
E-mail
export@jointcn.com
-
Phone
0086-15218746521
-
Address
64 block , Fumin industry , pinghu town , longgang dirstric , shenzhen city ,China
Product Categories
Shenzhen Joint Technology Co., Ltd.Free·1YRS
3500RPM Slant Bed CNC Lathe Machine , 350mm Workpiece CNC turning lathe machine
NegotiableUpdate on October 09
- Model
- Nature of the Manufacturer
- Manufacturer
- Product Category
- CNC Lathe Machine
- Place of Origin
- City, Province
Overview
3500RPM Slant Bed CNC Lathe Machine , 350mm Workpiece CNC turning lathe machine
Product Details
| Name: | Cnc Lathe Machine | Model: | HTC3640 |
|---|---|---|---|
| Max Swing Diameter Over Table: | 360mm | Max Length Of Workpiece: | 350mm |
| Z Aixs Limited Travel: | 400mm | Spindle Rotation Speed: | 3500rpm |
3500RPM Max Length Workpiece: 350mm Slant Type Cnc Lathe Machine Spindle Through Hole 48mm
Product Feature
1. The half and full enclosure, you can select
2. Hardened by induction, the machine bed and carriage has a long durability.
3. Electric turret and gang-tools turret can be both installed.
4. Manual lubrication or auto lubrication is up to you.
5. 4-position electrical tool post as standard, 6-position is for optional selection,
6. Mainly used for turning inner and outer cylindrical surface, end surface, taper surface, arc surface and thread of shaft, etc., with high efficiency and accurate processing.
7. The bed way has been finely grinned after ultra-tone quenching.
8. It is applied to various line like auto, valve, electric tools and hardware,etc.
ａnd carriage has a long durability.
Applicable industries
The series are widely used in auto,mould,bearings,electronic etc.
Can meet processing the aluminum,copper,non metal material,stainless,steel, steel,iron etc metal.
can one times fixture can automatically complete turning and bearing ,drilling ,reaming ,reaming and tapping processing .
Specification of cnc lathe machine
| Model | HTC3627 |
| Max swing diameter over table | 360mm |
| Max swing diameter over carriages | 120mm |
| Max length of workpiece | 200mm |
| Spindle head | A-4(5″) |
| Spindle motor | 5.5KW |
| Spindle rotation speed | 6000rpm |
| Spindle through-hole diameter | 56mm |
| bar diameter | 42mm |
| X axis limited travel | 380mm |
| Z axis limited travel | 270mm |
| Tool post | Gang tool /Four position electrical turret /six or eight position hydraulic turret |
| Height of tool turret center | 63mm |
| X axis rapid movement | 20m/min |
| Z axis rapid movement | 20m/min |
| Bed type | whole body slant type 45° |
| Dimension | 1500*1200*1700mm |
| Net weight | 1750kgs |
Standard accessories
GSK Or Syntec or Fanuc controller
hydraulic three jaw chuck
5.5KW servo spindle motor
Taiwan spindle
Imported ball screw
Imported linear way
Similar Product Recommend