Maintenance methods of metal conveyor belts are as follows: At first, adjust the tension axis of the metal conveyor belts, so as not to cause damage to the edge. Secondly, check whether there is corrosion inside the chain plate conveyor, for replacement. Finally, check whether the two ends of...
Product Details
Maintenance methods of metal conveyor belts are as follows:
At first, adjust the tension axis of the metal conveyor belts, so as not to cause damage to the edge.
Secondly, check whether there is corrosion inside the chain plate conveyor, for replacement.
Finally, check whether the two ends of the chain drive shaft are synchronized and whether the tooth ends are excessively worn.
Precautions in the use of chain board:
In the use of chain board, should avoid direct contact with the source of heat, should meet at least one meter away, and when used outside, avoid direct sunlight and other weather factors. And the conveying speed should be less than 2.5m/s.In the process of use, the tension of the metal conveyor belts should not be too large, and the chain plate should be kept as small as possible under the premise of occlusion and not bending with the gear. Each machine uses the same type of chain board of the same material.
When the metal conveyor belts is started, the empty engine of the transmission engine is started. Because the acceleration required when starting up is quite large, if there is material on the metal conveyor belts when starting up, there may be a problem of gear slip motor load is too high. When the machine is shut down, the material on the chain board should be emptied as far as possible. When multiple metal conveyor belts are running, the sequence of entry should be the last layer, and then forward. The stop sequence is reversed.
Hot Tags: metal conveyor belts, China, suppliers, manufacturers, factory, customized, price, pricelist, for sale, in stock, made in China, Drum Filter Chip Conveyor, Shafted Screw Conveyor, Chip Crusher, Chip Wringer And Separator, Aluminium Shredder, Screw Conveyor