Welcome Customer !

Membership

南京宏沐科技有限公司
Free Member ·1YRS
,
Other

Main Products: 传感器

Xwboo>Products
Product Categories

南京宏沐科技有限公司Free·1YRS

  • E-mail

    hmsensor@163.com

  • Phone

    800-828-9705

  • Address

    Nanjint city jiangning shuangnong street number 568 taixing square 1-1302

Contact Now

HM31 Differential Pressure Transducer

Model
Nature of the Manufacturer
Other
Product Category
Differential Pressure
Place of Origin
City, Province
Overview
HM31 differential pressure transducer adopts German HELM made differential pressure sensitive chip and special transducer integrated circuit as well as high – performance key set and strict production process to ensure that this series of product features superior performance, small dimensions, easy installation, which is best ideal for measurement of micro differential pressure, flow field, flow rate, and flow.
Product Details

Features of Product

☆High ratio of performance to cost

☆ Fully made of stainless steel with small dimensions, light weight, and easy installation

☆ Reliable and stable performance

☆ Range of differential pressure: 0 ~ 10KPa … 2MPa

☆ Static high pressure resistant to 20MPa

Application of Product

☆ Industrial process control

☆ Flow measurement

☆ Medical instrument

☆ Air power measurement

☆ Hydraulic and pneumatic equipment

Details

 

Measuring range

0 ~ 10KPa…2MPa

Full scale range 

10 ~ 50KPa

50 ~ 100KPa

0.1 ~ 0.2MPa

0.2 ~ 0.5MPa

0.5 ~ 1MPa

1 ~ 2MPa

Positive permissible over pressure  

250KPa

300KPa

0.4MPa

1.0MPa

2MPa

4MPa

Negative permissible over pressure

100KPa

200KPa

0.3MPa

0.5MPa

0.7MPa

1MPa

Maximun static pressure

≤20Mpa 

Overall accuracy
(Linear, repeatability, lagging)

± 0.1%FS

± 0.25%FS

± 0.4%FS

Zero point temperature drifting

± 0.02%FS / ℃ (typical)

± 0.05%FS / ℃ (maximum) 

Sensitivity temperature drifting

± 0.02%FS / ℃ (typical)

± 0.05%FS / ℃ (maximum)

Influence of static pressure

± 0.05%FS / 100KPa 

Range of operating temperature

-10℃ ~ 80℃

Range of compensating temperature 

-10℃ ~ 50℃

Long-term stability

± 0.3%FS / year (≤200KPa)

± 0.1%FS / year (≥200KPa) 

Range of power supplying

12 ~ 36V DC (24V DC generally)

Signal output

2-wire 4~20mA; s-wire 0 / 1-5V DC

Response time

≤2ms 

Insulation resistance

100MΩ, 500V DC 

Influence of vibration

Change ≤1% after vibration of 3gRMS30 ~ 2000Hz

Impact

Change ≤1% after impact of 100g for 10ms

Service life

1×108 pressurized cycle

Medium

The gas or liquid compatible with material of structure

Explosion – proof marking

Ex ia II CT5 (intrinsically safe explosion – proof   

Weight

Approx 0.35KG 

Thermal lagging

± 0.1%FS (typical) 

Enclosure protective degree

Plug Type (IP 65)

Cable Type (IP 67)

Product selection

HM31

Differential Pressure Transducer

Guideline of Selection

Differential Pressure Transducer

Range

Measuring Range

0 ~ X KPa or 0 ~ X MPa

Code

Overall accuracy (linear + repeatability + lagging)

1

± 0.4% FS

2

± 0.25% FS

3

± 0.1% FS

 

Code

Signal Output (standard power supply of energization)

 

A1

4 ~ 20mA (12 ~ 36V DC)

 

V1

1 ~ 5V DC (12 ~ 36V DC)

 

V2

0 ~ 5V DC (12 ~ 36V DC)

 

V3

0.5 ~ 4.5V DC (12 ~ 36V DC)

 

 

Code 

Additional functions

 

 

F1

M20 x 1.5 external thread

 

 

F2

G 1 / 4 external thread

 

 

F0

Special

 

 

W1

Cable type (IP67, 2m)

 

 

W2

Socket type (IP65, DIN 43650)

 

 

E

Intrinsically safe explosion - proof type Ex ia II CT5

 

 

 

 

 

 

 

 

HM31 (0 ~ 50kPa)

— 1

— A1

— F2

— W1 Differential Pressure Transducer

Tips of Selection

It is recommended that three – valve set should be installed between the point to be measured and the transducer to make sure the medium to be measured is slowly and evenly applied on the positive and negative chambers in order to ensure running safety and reliability of the transducer.It is recommended that the pressure ports on both ends should be located above the horizontal line so as to minimize the influence of the installing position to the product when installing.Please pay attention to the static pressure to be measured shall be less than 20MPa and the over pressure applied on the positive and negative chamber shall not exceed the specified value of the product when selecting.The code E, an additional functional code for selection, and intrinsically safe explosion-proof Ex ia II CT5 must be power supplied via safety barrier.Please contact us in case of the other special requirements and clearly indicate them when placing an order.

Similar Product Recommend