-
E-mail
jiangkaige@haozhihs.com
- Phone
-
Address
No. 6 Jiangdong Street, Yonghe Economic Zone, Guangzhou Economic and Technological Development Zone
Membership
Help
Guangzhou Haozhi Industrial Co., LTD.Free·1YRS
jiangkaige@haozhihs.com
No. 6 Jiangdong Street, Yonghe Economic Zone, Guangzhou Economic and Technological Development Zone
1.Highprecision: The total run-out of the shaft end of the motorized spindle forwoodworking in the inner hole is ≤0.002mm; the vibration of the spindle is≤1.5mm/s; it is characterized with unparallel high precision.
2.Highspeed: The maximum speed of the motorized spindle for woodworking is up to24,000rpm, which can meet requirements for high-speed and efficient machining.
3.High configuration: As a standard configuration, themotorized spindle for woodworking is equipped with the induction switch for thespindle release cutter from Germany, temperature sensor, closed-loop controlencoder, etc.
4.High bearing capacity and rigidity: The front of thespindle is designed with a ceramic ball bearing of international well-knownbrand and big span bearing layout to ensure the high bearing capacity andrigidity of the spindle
5.Customization:The motorized spindle for woodworking is widely used for engraving and millingof various kinds of woods, plastics and fiber board as well as variouswoodworking machines. It can also be customized according to special needs ofcustomers.
6.Highheat dissipation: Its body is made of the aluminum with good dissipation;moreover, its body surface is designed with radiating fins, which caneffectively reduce the heat of the motor. In particular, it is equipped with anadvanced axial fan from Germany at its tail end which can greatly improve theeffect of heat dissipation and also reduce the noise from fan cooling andvibration from fan rotating.
| Spindle Model | DGZMG-07124/10.2-KPNLS | |
| Speed | Rated Speed(rpm) | 12000 |
| Maximum Speed(rpm) | 24000 | |
| Power | Rated PowerS1(kW) | 8.5 |
| Rated PowerS6(kW) | 10.2 | |
| Torque | Rated TorqueS1(Nm) | 6.8 |
| Rated TorqueS6(Nm) | 8.1 | |
| Maximum Voltage(V) | 380 | |
| Handle model | ISO 30 | |
| Tool-change mode | Pneumatic | |
| Form of broach | Floating broach | |
| Broaching force(N) | 2800x(1±10%) | |
| Cooling method and Medium | Electric fan | |
| Form of Lubrication | Grease | |
| The Weight(kg) | ~35.5 | |
| Dimension(mm) | D | 110 |
| D1 | 121.5 | |
| H | 179.5 | |
| H1 | 70.5 | |
| H2 | 142.5 | |
| B | 80 | |
| B1 | 142 | |
| L | 539.3 | |
| L1 | 112.9 | |
| N-S | 6-M6 | |