-
E-mail
jiangkaige@haozhihs.com
- Phone
-
Address
No. 6 Jiangdong Street, Yonghe Economic Zone, Guangzhou Economic and Technological Development Zone
Membership
Help
Guangzhou Haozhi Industrial Co., LTD.Free·1YRS
jiangkaige@haozhihs.com
No. 6 Jiangdong Street, Yonghe Economic Zone, Guangzhou Economic and Technological Development Zone
1.High precision: The total run-out of the shaft end of the motorizedspindle for woodworking in the inner hole is ≤0.002mm; the vibration of thespindle is ≤1.5mm/s; it is characterized with unparallel high precision.
2.High speed: The maximum speed of the motorized spindle for woodworkingis up to 24,000rpm, which can meet requirements for high-speed and efficientmachining.
3.High configuration: As a standard configuration,the motorized spindle for woodworking is equipped with the induction switch forthe spindle release cutter from Germany, temperature sensor, closed-loopcontrol encoder, etc.
4.Diversified cutter interfaces: The motorized spindle for woodworking canbe equipped with a variety of interface forms such as HSK F63, A63, E50and E40, etc., which can meet different needs of customers.
5.High bearing capacity and rigidity: The front ofthe spindle is designed with a ceramic ball bearing of international well-knownbrand and big span bearing layout to ensure the high bearing capacity andrigidity of the spindle.
6.Customization: The motorized spindle for woodworking is widely used forengraving and milling of various kinds of woods, plastics and fiber board aswell as various woodworking machines. It can also be customized according tospecial needs of customers.
7.High heat dissipation: The specially designed spiral cooling waterchannel can remove heat generated by the motor quickly. Together with thealuminum-made body with high strength and high thermal conductivity, it canfurther slow down the temperature rise of the spindle.
| Spindle Model | DGZMG-07524/18-KPWCS | |
| Speed | Rated Speed(rpm) | 12000 |
| Maximum Speed(rpm) | 24000 | |
| Power | Rated PowerS1(kW) | 15 |
| Rated PowerS6(kW) | 18 | |
| Torque | Rated TorqueS1(Nm) | 12 |
| Rated TorqueS6(Nm) | 14 | |
| Maximum Voltage(V) | 380 | |
| Handle model | HSK F63 | |
| Tool-change mode | Pneumatic | |
| Form of broach | Non floating broach | |
| Broaching force(N) | 11000x(1±10%) | |
| Cooling method and Medium | Water | |
| Form of Lubrication | Grease | |
| The Weight(kg) | ~31 | |
| Dimension(mm) | D | 95 |
| D1 | 114 | |
| H | 156 | |
| H1 | 75 | |
| H2 | 75 | |
| B | 150 | |
| B1 | 134 | |
| L | 360.5 | |
| L1 | 45 | |
| N-S | 4-M8 | |