ISO flanges and pipe fittings
ISO flanges are specially designed for pipe diameters above 2". Due to different locking tools, they are divided into ISO-K (clamp flange) and ISO-F (screw flange). Gaochuan ISO flange follows ISO specifications , In line with world specifications.
The sealing method is the same as the KF series. The O-ring is used to tightly seal the vacuum. The lowest pressure can reach 1x10 Torr.
The clamp-type ISO flange (ISO-K) is fixed by "two-way clamp screws", so there is no problem of directional assembly interference in the combination configuration.
The screw-type ISO flange (ISO-F) uses screws and is evenly locked around the flange. Although there is directionality, the combined strength and uniformity of the seal are stronger than that of ISO-K.
Gaochuan also makes a series of adapters for the ISO series, please refer to the catalog adapter section.
Cleaning and packaging
All the solder joints of the product are 99% leak-tested. The product is cleaned by ultrasonic cleaning equipment. The water quality uses deionized water that meets the requirements of semiconductors. The packaging environment is used in a high-clean environment to make the overall product combination and packaging to ensure the cleanliness of the product.
Standard specification application: high vacuum
Material: 304/L·316/L·Mg-Al alloy AL6061 Flange size range: ISO63~IS0320
Standard pipe diameter size range: 1/2"~6" (pipe diameters over 8" are customized pipes)
Surface treatment of pipe fittings: sandblasting
Pressure range: 760 Torr~1x10-13 Torr Gasket material: FKM·Buna-N or silicone Temperature range: less than 200 degrees Celsius
(Long-term operation is less than 150 degrees Celsius)