Walk in silk main features:
"Slow wire structure closed loop servo wire cutting" is the Hantzsch go wire series, the fourth-generation product, which combines the EDM machine design.
The machine movement precision, accuracy transported silk, water filtration accuracy of the EDM accuracy standards. Then carry Hantzsch self-developed high stability Digital Power. It machined workpiece fully comparable with the EDM.
◆ body part - high quality resin sand casting machine body with a product shaped structure, the table will not move when the left and right directions out of the base body, greatly increasing the rigidity of the machine.
◆ machine precision - the full import of high-precision linear guide and ball screw with Japanese Panasonic AC servo motor directly connected, to solve the traditional machine driven by servo error caused it to exactly the same wire EDM machine precision, greatly improving the life of the machine.
◆ wire transport system - transport the package all-imported linear guide, transportation wire tube smooth operation, high accuracy. Transport silk yarn with a tight two-way automatic device solves the unilateral Songsi phenomenon.
◆ U, V axis means --U, V-axis linear guide with a full import and body connection, greatly enhancing the U, V axis rigidity, and the capstan got strong stability.
◆ Mask device - Mask using EDM structure of the automatic lifting device to prevent the molybdenum wire shake again. Its maximum near the surface of the workpiece machining, electrical discharge machining to achieve unlimited basis.
◆ CNC power - using the graphics driver software, XP operating system, make operation easier to understand, so that other traditional software incomparable, the use of advanced discharge control technology, with processing repair tool speed, high quality finish and many other features.
v filtration system - using the EDM structure of filtration systems, high filtration precision, long life characteristics of water.
◆ lubrication system - automatic lubrication system, without human intervention, the realization of all machine screw linear guide and lubricate the machine at the same time having the oil recovery mechanism, oil will not flow to the ground, to ensure clean processing area.
To ensure the stability of the machine equipment, Matsushita closed-loop servo motor direct-drive (stepper line cutting gear transmission) automatic detection of feedback compensation to ensure the accuracy of the device for a long time constant. Precision machine tools ≤5um (EDM 3um ~ 5um)
Japan is using a high-frequency control power discharge sources
1) precision machine equipment ≤5um (EDM 3um ~ 5um)
2) low loss (wire loss 400000mm? Within the trace only)
3) Super finish Ra≤0.7um
The device structure of science, easy operation, precision equipment for a long time constant, and low maintenance cost, the price is half wire walking, suitable for high-precision products and large enterprises.