Cold chamber die casting process tecnology and principle
The die casting tecnology is a process of organically combining the three major elements of a die casting machine, a die casting mold, and an alloy and comprehensively using them.
For cold chamber die casting machine , the metal liquid is poured into the pressure chamber by manual or automatic pouring equipment, and then the injection plunger is advanced to press the metal into the cavity.After the molten metal solidifies, the die-casting mold is opened, and the casting is taken out to complete a die-casting cycle.
The tecnological process of die casitng as below :
the debugging of die casting machine →2.the installation of die casting moulds →3.mould preheating and coating →4.closing the mould →5.pouring and injection →6.hold press→7.open the mould and pulling core →take the die casting parts out
The specification of 38T cold chamber aluminum making machine
the installation drawing of the die casting mould
The details of the 38T aluminum pressure die casting machine
Model YSC38 horizontal cold chamber die-casting machine is one of series of products, ministry approved. It may be used for casting of nonferrous metal, as of Al.Zn.Cu.…, and It’s alloy. It is an ideal equipment for casting small sized parts fine and compact, with capability of 700~900 pieces in eight-hour shift.
Injection unit
Injection unit has two-stage of speed.
Hydraulic circuit
In hydraulic circuit system pressure is 8.5 Mpa. This pressure by discharge valve PV1.
Lubricant system
The machine adopts central oil lubrication, so lubricant must be clean. The lubrication interval of the lubrication system can be set in the human-machine interface.
Cooling system
This machine has been equipped with the cooling water system which consists of the cooler and water pipe and the cooling water system will be used mainly by the hydraulic oil cooling, the supply water must be the clean and neat tap water or fresh water.
About us
1.With a history of over 37 years
2.Factory Area : 40,000 square meters
3.Employees : More than 500 *
4.Production Capacity :
5.10,00-sets yearly capacity
6.Company owed Tech & Research center
7.Main Machines: 100sets
FAQ:
Q:How about your warranty and after-sales services?
A:We have one one year warranty for the machine .Our professional masters could overseas to help to install and debug the machine also providing free training until you have got the skill.
Q: what temperatures does the cold chamber die casting machine operate?
A:Pls kindly note the oil temperature can not exceed 55 °, for materials temperature ,the aluminum alloy is about 700 °,the zinc alloy is 420 °,the brass is about 950 °.