30T hot chamber die casting machine is one kind of full-automatic (programmed control) hot chamber die-casting machine, (hereafter referred to as hot-chamber die casting machine for short), commonly used to cast zinc alloy accessories and other accessories with low melting point.
Product Details
The basic information of J213D
The style :30T hot chamber die casting machine
Suitable materials:suitable for having low melting point metals such as :zinc ,lead etc .
weight :2900kg
Inner space between bars (HXV):240X240mm
Package :in nude packing for the machine
Specification of J213D
The mould installation of J213D
The devices of J213D
This machine is one kind of full-automatic (programmed control) hot chamber die-casting machine, The automatic working cycle of the machine is as follows: die closing →injection → injection delay →injection return →cooling delay → die opening → ejection forward→ ejection backward →push off →push off back→ detect casting → spraying the die casting mould →die closing →…….
The four tie bars are made from alloy steel of high quality, whose surface are processed through quenching and tempering with a coating of hard chrome plating, so it have a very long service life.
The working pressure of the hydraulic system of this machine is 7Mpa, using vane pump with flow of 50L/min. In hydraulic circuit there has a unloading relief valve used for keeping the working pressure at 7MPa. There are two accumulators in hydraulic circuit for stabilizing pressure and achieving high speed of die opening and closing.
Melting furnace---the standand furnace for this machine is deisel furnace and you can also choose the electric furnace and the natural gas furnace .While running continuously, the oil consumption is 4kg/h.
The lubrication of the machine adopts the method of lubricating with grease centrally and the lubricating grease must be kept clean. The type of the lubricating grease the machine uses is the N0:000# extreme pressure lithium based grease and other types of lubricating grease are not allowed to use, or else the lubricating unit could be clogged.
The programmable logic controller (PLC) and graphic lpetating terminal are imported from Japan Mitsubishi.
More of us
Since its foundation in1981, after a 37 years's development and dedication, Ningbo Dongfang Die -casting Machine Co.,Ltd has owned 40000 square meters production bases. Ningbo Dongfang Die -casting Machine Co.,Ltd is a high-tech company specializing in manufacture and export of hot and cold chamber die casting machines and after-sales services.
After-sales Service
When shipment arrives, the seller appoint engineer to buyer's factory for machine commissioning and installation and training workers.And we have one year warranty for the machine .
Pls kindly note we are not only an enterprise integrating industry and trade but also we provide one-stop service .
If you have any problems pls contact us in your any time and we will provide you a professonal progress for you .