Welcome Customer !

Membership

Ningbo Dongfang Die-casting Machine Tool Co.,Ltd.
Free Member ·1YRS
,
Other

Main Products: 压铸机床

Xwboo>Products

Zamak Injection Machine

Model
Nature of the Manufacturer
Other
Product Category
Fully Automatic Hot Casting Machine
Place of Origin
City, Province
Overview
The basic information of J213E hot chamber die casting machine The style:38T hot chamber die casting machine Suitable materials:suitable for the zinc and lead The size:3.5*1.45*2.1m HS code :8454309000 The package:the machine in nude package and the wooden cases for accessories. The...
Product Details

The basic information of J213E hot chamber die casting machine

The style:38T hot chamber die casting machine

Suitable materials:suitable for the zinc and lead  

The size:3.5*1.45*2.1m

HS code :8454309000

The package:the machine in nude package and the wooden cases for accessories.


The specification of J213E

image

The mould installation drawing

imageimage

The details of the J213E hot chamber die casting machine

This machine is one kind of full-automatic (programmed control) hot chamber die-casting machine,  (hereafter referred to as hot-chamber die casting machine for short), commonly used to cast zinc alloy  accessories and other accessories with low melting point. 

Die-closing unit --The die-closing unit consists of platens, oil cylinders, four tie bar and other parts. The four tie bars are made from alloy steel of high quality, whose surface are processed through  quenching and tempering with a coating of hard chrome plating, so it have a very long service life. 

IMG_2300

Injection unit --The injection unit of die casting machine is the divise used to push the materials into the mould.It is usually driven by hydrulic power.Accumulators are used to increase the speed of the injection of the die casting machine. The die-casing  chamber and the piston are immersed into molten metal; A jet pipe is mounted on the mouth of the gooseneck kettle, nozzle is connected closely with  the fixed platen; Molten Metal is injected from the gooseneck kettle into the die-casting mould by the  vertically-moving piston; When the injection piston returns, the molten metal will return into the  gooseneck kettle automatically. 

Because the injection piston rings are operating under the state of high temperature, high speed and high  pressure, replacing them frequently is necessary. 

Automatic detect unit-- The working process of the automatic detect unit is as follows: After the casting is pushed down into the  tilted scoop, it moves through the swaying gate and trigger the switch to act responsively. Then the casting  is picked up and the next working cycle can proceed.  If, by virtue of any reason, the casting hasn’t been pushed down timely and can’t be picked up, the  machine will stop automatically and give an alarm. 

Hydraulic pipeline system --The working pressure of the hydraulic system of this machine is 9Mpa.The hydraulic system of the machine adopts pressure double-scale system so that can be adjusted at discretion. The ejecting system use large-caliber logic and cantilever beam-type oil-way, which ensure high ejecting speed.


液压器

Melting furnace-- The machine was adopted full automatic combustion furnace as sets of melting unit, its power is 0.18KW.  While running continuously, the oil consumption is 6kg/h.  

Electrical operation system --The machine is equipped with an electrical control cabinet, which is connected to the main switch of the  power supply. The voltage range of fluctuation (allowable) must be limited within 10%, or else a voltage  regulator must be installed. The main circuit of hydraulic and pneumatic control uses 380V AC power supply. The solenoid valve and  logical control circuit uses 24V DC power supply, which is converted into by a power rectifier. 

电路

The devices Brand Country

programmable logic controller (PLC)

Mitsubishi  Japan 
Vane pump YUKEN Japan

Pressure reducing valve

YUKEN Japan
Overflow valve YUKEN Japan

About us

Since its foundation in1981, after a 37 years's development and dedication, Ningbo Dongfang Die -casting Machine Co.,Ltd has owned 40000 square meters production bases. Ningbo Dongfang Die -casting Machine Co.,Ltd is a high-tech company specializing in  manufacture and export of hot and cold chamber die casting machines and after-sales services.

工厂

FAQ

Q:Are you a manufacturer of a trade company?

A:We are a manufacturer.And we have our own Export rights.

 

Q:If we don't know how many tons machine will be suitable for our products ,what we should do ?

A:It 's no proplem.You can send us the the weight ,size and the materials of your products and our professional master will recommend the most suitable machine with you .

 

Q:How is your delivery time?

A:Generally ,we can dilivery the machine within 7-10 days after receiving your advance payment.

But it also depends on the iterm and the quantity of your order.

 

Q:How about the payment terms?

A:Generally ,the 30% T/Tdeposite ,the balance 70% T/T before delivering the goods.

 

Q:How about your warranty and after-sales services?

A:We have one one year warranty for the machine .Our professional masters could overseas to help to install and debug the machine also providing free training until you have got the skill.

 

Q:How about your packing ?

A:Generally ,the machines are in nude packing and the spare parts are in wooden cases.



Similar Product Recommend