Product Overview
H9MO-LMFE is a carrier-class,cost-effective, compact (only 1U high), STM-1/STM-4/STM-16 SDH/MSPP platform that is designed for application in metro and access networks to facilitate the efficient transport of traditional TDM and emerging data traffic for service providers.
H9MO-LMFE is a cardbased compact SDH equipment, designed mainly as a gateway node between the core SDH network and a number of remote CPE boxes. It may also be used as a multi service SDH ADM node in a typical ring or mesh network. The 1U high 19" wide chassis of the H9MO-LMFE has 8slots, with 2 slots for the DC(1+1)/AC power supply, 1 slot for network management card, 1 slots for STM-1/STM-4/STM-16 uplink, and 4 slots left forservices (STM-1, Ethernet, E1, E3/DS3, V.35 Etc.).
H9MO-LMFE supports multiple SDH network features as follows:
l Support1+1 MSP, SNCP protection
l Management channel can be DCC/E1/VC12
l Support up to STM-16
l E1 BERT test is embedded
l Internal clock/external clock/line clock/clock holdover
l Ethernet service supporting GFP encapsulation, VC12 virtual concatenation and LCAS, PVLAN, 802.1Q VLAN and QinQ
l Large cross-connect matrix capacity, support up to 46*VC-4 of VC-4 level full cross connection and 24*VC-4 of VC-12 or VC-3 level full cross connection
l 64 remotesite’s Ethernet over 8*E1 aggregation
l 252 remotesite’s Ethernet over 1*E1 aggregation
l 64 Ethernet over SDH aggregation
H9MO-LMFE supports the following services ondifferent ports:
l STM-1o/STM-1e/STM-4/STM-16
l GE/FE(Optical and Electrical)
l E1/V.35/E3/DS3
Hardware Architecture
Slot description:
H9MO-LMFE is composed of aggregation card and tributary service card. There are 8 slots, including 2 slots for hot standby power cards, 1 slot for management card, 1 slot for SDH cross-connection cards, and 4 slots for tributary cards.
Features
Cross-connection Capacity | High Order: 46*46 VC4s Low Order: 1512*1512 VC12s |
Cross-connection mode | bidirectional, unidirectional, multicast/broadcast and loopback |
Specifications
Index | Performance Parameter |
SDH/PDH Interface | Max | STM-1 | 2 aggregation + 8 tributary STM-1 optical interfaces (Can be SFP) |
STM-4 | 2 aggregation STM-4 interface,, SFP |
STM-16 | 2 aggregation STM-16 interface, SFP |
Connector | SC/PC or FC/PC or SFP |
Spec. | S-1.1, S1.2, L-1.1, L-1.2, S4.1, S4.2, L4.1, L4.2, S16.1, S16.2, L16.1, L16.2 |
Single fiber bi-directional interface can be optionally supported |
Service Card | PWR01 | DC-48V power card, 1+1 backup |
PWR02A | Power Card ~220V AC |
PWR02B | Power Card ~110V AC |
NM02 | Network Management Card |
OX01A | Dual STM-1 aggregation optical card |
OX01Q | Four STM-1 aggregation optical card |
OX01S | Dual STM-1 aggregation optical card (SFP) |
OX04A | Dual STM-4 aggregation optical card (SFP) |
OX16A | Dual STM-16 aggregation optical card (SFP) |
EX01 | Dual STM-1 aggregation electrical card |
OS01 | Dual STM-1 tributary optical card, SC or FC |
OS01S | Dual STM-1 tributary optical card, SFP |
OS02 | 2 Ethernet +Dual STM-1 tributary optical card |
OS02A | 2 Separate Ethernet +Dual STM-1 tributary optical card |
OS03 | 1 Ethernet +Single STM-1 tributary optical card |
OS04A | Dual STM-4 tributary optical card |
OP02 | 2×E1+1×V.35 PDH card |
OP03 | 2×E1+1×100Base-Tx PDH card |
OP05 | 4×E1+1×100Base-Tx PDH card |
OP06 | 4×E1 PDH card |
EP01 | 24×E1 (75W or 120W RJ45, occupies 2 slots) |
EP01A | 24×E1 (120W, DB60) |
EP03 | 12×E1 (75W or 120W RJ45) |
EP03A | 12×E1 (120W, DB60) |
EP02 | 1×E3/DS3 |
FE01 | 4 FE over 4 VCG trunks (EoS) |
FE02 | 4 Fx over 4 VCG trunks (EoS), SFP |
FE04 | 4 FE over 1~16E1 (EoE) |
FE05 | 4 Fx over 1~16E1 (EoE), SFP |
FE06 | Ethernet aggregation, EOS, aggregation ratio: 8:2, dual FE ports |
FE06A | Ethernet aggregation, EOS, aggregation ratio: 4:1, single FE port |
FE07 | EOE, Ethernet aggregation, aggregation ratio: 8:2, dual FE ports |
GX01A | EOS, Ethernet aggregation, aggregation ratio: 8:1, single GE electrical or optical port |
GX02A | EOE, Ethernet aggregation, aggregation ratio: 8:1, single GE electrical or optical port |
GX05 | EOS, Ethernet aggregation, aggregation ratio: 16:1, dual GE electrical or optical port |
GX06 | EOE, Ethernet aggregation, aggregation ratio: 16:1, dual GE electrical or optical port |
GXS06 | Standard EOE, Ethernet aggregation, aggregation ratio: 16:1, dual GE electrical or optical port |
EA05 | EOS, Ethernet aggregation, aggregation ratio: 16:1, no outer Ethernet port |
EA06 | EOE, Ethernet aggregation, aggregation ratio: 16:1, no outer Ethernet port |
EAS06 | Standard EOE, Ethernet aggregation, aggregation ratio: 16:1, no outer Ethernet port |
GE01 | 2 GE Opitcal/Electrical port over 2 VCGs Trunk (VC-4 Level) |
ED01 | 2×V.35 Card (framed or unframed) |
DX01 | VC-4/VC-3/VC-12 level cross connection |
DX02 | Full 64E1 DS0 cross connection (2048×2048,64K) |
LA01 | Order wire and external clock card |
PDH interface | Max E1 | 72 E1s |
Max E3/DS3 | 4 E3/DS3 |
Ethernet | Interface | 10/100Base-Tx or 100Base-Tx, Comply with IEEE 802.3 |
Max FE Interface | 16 FE ports (14 FE01 or FE02 cards support) |
Encapsulation | Comply with ITU-T G.7041 (VCAT, GFP, LCAS) |
V.35 | Max Interface | 8 V.35 interfaces (framed or unframed) DCE/DTE |
Cross-connect Capacity | Uplink STM-1 | High order 12×12 VC-4s Low order 756×756 VC12s |
Uplink STM-4 | High order 16×16 VC-4s Low order 1008×1008 VC-12s |
Uplink STM-16 | High order 46×46 VC-4s Low order 1512×1512 VC-12s |
Management | Interface | 10/100 Base-T (can be cascaded) |
EOW interface | Standard socket RJ11 |
Physical Dimension(H/D/W) | 1U: 440 × 44 ×280 (mm) |
Power | Supply | -48V DC / 220V AC |
Consumption | ≤40W |
Environment | Temperature | 0°C~50°C |
Humidity | ≤90 %(non-condensing) |
Weight (full-load) | ≤3.5KG |
Typical Application
l Integrated Services Access
l Ethernet over PDH Aggregation Application
Standard Compliance
Items | Standards and Protocols |
SDH Interface | ITU-T G.957, G.707 |
E1 port | ITU-T G.703, G.704 |
Clock port | ITU-T G.823 |
Ethernet port | IEEE 802 G.7041/G.704 2/G.7043 and G.8040 |