Product Overview
EoPDH Converter Series is cost-effective intelligent converters which can connect Fast Ethernet LAN over E1 channel, which adopts standard GFP encapsulation protocol. They enable service providers and ISPs to provide transparent Ethernet services without interfering with user traffic. In addition to point to point application, the equipment can also work with office device H0FL-P as aterminal device with 16 service directions.
Table-1 EoPDH Series Converter Models
Type | E1 Port Qty | 100Base-Tx Electrical Port Qty | 100Base-Fx Optical Port Qty | Remarks |
H0FL-S01100 | 1 | 1 | / | |
H0FL-SF01100 | 1 | 1 | 1 | |
H0FL-S01100SN | 1 | 4 | / | SNMP |
H0FL-S04100 | 4 | 1 | / | |
H0FL-SF04100 | 4 | 1 | 1 | |
H0FL-S04100S | 4 | 2 | 1 | SNMP |
H0FL-S04100SN.V3 | 4 | 4 | / | SNMP |
H0FL-S08100 | 8 | 1 | / | |
H0FL-SF08100 | 8 | 1 | 1 | |
H0FL-S08100SF | 8 | 2 | 1 | SNMP |
H0FL-S08100SN | 8 | 2 | / | SNMP |
H0FL-S16100SF | 16 | 2 | 1 | SNMP |
H0FL-S16100SN | 16 | 2 | / | SNMP |
Hardware Architecture
H0FL-S01100/SF01100
H0FL-S04100/SF04100
H0FL-S04100SF
H0FL-S08100SN/S08100SF
Specifications
System Parameters | Ethernet Electrical Interface | 1/2/4 x 10/100Base-Tx electrical ports |
Ethernet Optical Interface | 100Base-Fx optical interface |
E1/T1 Interface | 1, 4, 8,16 |
E1/T1 Interface Features | Interface specification | Comply with ITU-T G.703 |
Code pattern | HDB3 |
Bit rate | 2048kbit/s ±50ppm |
Impedance | Selectable 75W, 120W |
Connector | RJ-48C |
Ethernet Port | Interface specification | Comply with ITU-T G.7043, G.8040, IEEE 802.3, IEEE 802.1Q, 802.1p |
Working mode | Auto negotiation or 10/100M full/half duple mode |
Connector | 100M electrical port: RJ45 |
100M optical port: SC/FC |
Power Supply | AC | ~220V (100~240V, 50/60Hz) |
DC | -48V (-36~-72V) |
Consumption | H0FL-S01100/SF01100/S04100/SF04100/ S08100/SF08100/:≤3W H0FL-S01100SN/S04100SF/S04100SN/ S04100SN.V3/S08100SF/S08100SN/ S16100SF/S16100SN: ≤6 w |
Working Environment | Temperature | -5~ 45°C |
Relative Humidity | ≤90% (non-condensing) |
Dimension (W x H x D) | H0FL-S01100/SF01100/ S04100/S04100SF | 167mm×35mm×135mm |
H0FL-S01100SN | 195mm×35mm×140mm |
H0FL-S04100SN/S04100 SF/S08100SN/S08100SF | 440mm×44mm×138mm |
H0FL-S04100SN.V3 | 204mm×38mm×158mm |
Typical Application
s Point to point application
s Point tomultipoint application