Welcome Customer !

Membership

Jiangmen Pengjiang Weisheng Machinery Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 抛光机

Xwboo>Products

Jiangmen Pengjiang Weisheng Machinery Co., Ltd.Free·1YRS

  • E-mail

    956182975@qq.com

  • Phone

    0750-3729863

  • Address

    No. 66, Tianyuan Road, Chaolian Industrial Park, Pengjiang District, Jiangmen City

Contact Now

Round cover polishing machine

Model
Nature of the Manufacturer
Other
Product Category
End face outer polishing machine
Place of Origin
City, Province
Overview
Round cover polishing machine
Product Details

WH-PD1 dome polishing machine , which is the outer surface polishing or sanding equipment for small and medium-sized round and conical products, such as pots and cups. It has the characteristics of reliable performance, high safety and high efficiency. This machine is suitable for polishing or sanding the outer surface of small and medium-sized round and conical products.

Specifications and parameters

  1. Machine dimensions: 1100 × 1000 × 1470mm

  2. Motor power: main motor 4KW sub motor: 0.1KW

  3. Applicable consumables: Thousand impeller, nylon wheel, hemp wheel, cloth wheel

  4. Consumables specifications: Thousand impeller, nylon wheel, hemp wheel, cloth wheel: φ350mm or less

    Cloth wheel aperture: φ38mm (tossing the outer circle)

    6. Scope of application: It is suitable for the outer circle polishing or sanding of round and conical products below φ150mm×150mm.

    The main structure

    1: Body part: used to support the polishing wheel set, the protective cover and the main motor installation.

    2: Wheel part: The polishing wheel shaft is driven by the motor, the hemp wheel or cloth wheel is installed at the shaft end, and the thousand impeller and nylon wheel can also be installed. The screw can be loosened to the required angle.

    3: Shield part: Prevents splashing objects from flying out during the polishing process and injuring people.

    4: Workbench part: The auxiliary motor drives the workpiece to rotate. Under the action of the cylinder, the workpiece is pushed into the polishing wheel for polishing. After the workpiece is polished, it is sent out.

    5: Electronic control part: Use the PLC control system to control the start and stop of the whole machine through buttons (with automatic and manual functions), the polishing time can be adjusted on the display in the electric box.

    6: Clamp section: Clamp or loosen the workpiece. The compressed air draws the workpiece onto the fixture through a vacuum generator or blows the workpiece out of the fixture.

    7: Compensation part: After the polishing wheel is worn, use a wrench to shake the carriage so that the polishing wheel is close to the workpiece.

    8: Vacuum hood part: You can choose to install the vacuum hood.