Pinch Valve With Double Pneumatic Actuator

Online Consult Contact Information

Overview

China Pinch Valve Manufacturer JONLOO supplies Pinch Valve with Double Acting Actuator for mining application.

Product Details

K Series,With Open Body
Pressure Rating: PN16,
Flanged Ends
Body: Cast Steel,
Natural Rubber,
With double acting actuators.

Product name	Pinch Valve with pneumatic actuator
Work principle	The external air drives the cylinder to squeeze the inner sleeve to open or close
Size	DN25-DN1000
Body Material	Ductile Iron/Aluminum Alloy/Carbon Steel
Rubber sleeve technology	Imported top hand-made technology
Sleeve material	High wear resistant red rubber/ Pure gum rubber /Neoprene /NBR/EPDM, etc
Protective coating	Bias-ply, fabric-reinforced
Pressure/Temperature	0.6Mpa/1.0Mpa/1.6Mpa/ -35℃~+130℃
Flange ends	PN10/16, ANSI 150LB, etc
Medium	Sewage, pulp, acid and alkali medium, dry powder, slurry and solids handling etc.
Actuator	Double acting or Single acting, accessories are available
Advantages	1.No pressure loss, non-blocking, zero leakage, impact resistant 2.Full face-to-face integral elastomer molded flange 3.Manufactured to high standards 4.Superior service life 5.Sleeves available in a wide variety of elastomers 6.Custom sizes available 7.Bare body construction：The dynamic situation of the sleeve can be observed directly on the spot 8.With bias-ply, fabric-reinforced coating to protect the rubber sleeve, the sleeve is high abrasion resistant, corrosion resistant, tear resistant and fatigue resistant. 9.The sleeves are the only wetted part of the valve, eliminating the need for valve bodies made of expensive metal alloys. Because the sleeves are the only wetted part, they are the only replacement part needed in pinch valves, thus can save a lot of cost.