This type of clamp has the advantage of space saving, but the mold edge must have a U groove for its clamping, and the bottom is made suitable for sliding in the T groove of the table.
PRODUCT DETAILS
>> Specifications
Model | Unit | TX-2 | TX-4 | TX-6 | TX-10 | TX-16 | TX-25 |
Clamping Farce(at 250kgf/cm2) | tons | 2 | 4 | 6.3 | 10 | 16 | 25 |
Full Stroke (X) | mm | 8 | 8 | 8 | 8 | 8 | 8 |
Clamping Stroke (Y) | mm | 4 | 3 | 3 | 3 | 3 | 3 |
Extra Stroke (Z) | mm | 4 | 5 | 5 | 5 | 5 | 5 |
Cylinder Capacity at Full Stroke | cc | 6.5 | 13 | 21 | 32 | 54 | 84 |
* Extra stroke is the difference between full stroke and clamping stroke with extra space allowed for safe operation.
Clamp Dimensions
Model | E | F | G | H | K | MIN. | PT |
TX-2 | 49 | 52 | 18 | 38 | 12 | 8 | 1/8 |
TX-4 | 68 | 60 | 25 | 59 | 15 | 10 | 1/4 |
TX-6 | 78 | 65 | 30 | 64 | 16 | 14 | 1/4 |
TX-10 | 98 | 71 | 40 | 79 | 16 | 17 | 1/4 |
TX-16 | 127 | 78 | 50 | 88 | 16 | 20 | 1/4 |
TX-25 | 148 | 100 | 60 | 98 | 15 | 23 | 1/4 |