RY350 degree high temperature heat conduction oil pump
RY350 degree of heat conduction oil pump structure:
(1) a single face seal: the use of injection type flushing, flushing liquid for about 100 degrees Celsius, reducing the second line of wax, the pressure ratio of the seal cavity high 0.05~0.15Mpa. Hot water (soft water) is used in the outer side of the gland. Generally can use a cycle (ten months).
(2) double face machine seal: the use of circulating flushing, plus external cooling, life is a single face 1.5~2 times.
(3) metal bellows seal: compact structure, easy to install, in the case of the same auxiliary system, the life of 2~3 times the general seal.
(4) pairs of friction pairs of hard hard (YG6/YG8, SiC/SiC, etc.), high viscosity, containing a small amount of solid particles in the media or the crystallization of the media, has a good effect.
RY350 degree high temperature resistance heat pump introduced the seal below how to cool down:
RY350 high temperature heat pump set of cooling water in the sealed cavity around the cooling with cold water, which makes the seal cavity temperature down to 200~250 DEG C for single seal, using the injection washing, cleaning, leading from the outside temperature is about 100 DEG C oil (diesel diesel is generally not, because the product is reduced), the temperature, and improve the working environment, is the effective way; the gland with nasty cold water; in addition to lower temperature, can prevent the water pipe blockage shooting two birds with one stone.
RY350 high temperature heat pump improvement for air-cooled hot oil centrifugal pump adopts imported polytetrafluoroethylene (PTFE) for the lip seal, the sealing performance produced a leap, than the reliability of the rubber seal 25 times, strong corrosion resistance.