Welcome Customer !

Membership

Botou Yijia Industry Co. Ltd.
Free Member ·1YRS
,
Other

Main Products: 水泵

Xwboo>Products

Heat conducting oil pump

Model
Nature of the Manufacturer
Other
Product Category
RY, BRY heat pump
Place of Origin
City, Province
Overview
Heat conducting oil pump
Product Details

Heat oil with radiating structure, change to the conventional water cooling structure, which has the advantages of simple structure, small volume, low running cost, good performance, reliable use, is China's digestion and absorption was developed based on the second generation of foreign oil products, the basic structure is a single-stage single suction cantilever foot support structure, imported heat the pump is axial suction, export centered vertically, together with the motor installed on the base.
A heat pump is supported by the ball bearings at the both ends, front end lubricated by lubricating oil, is lubricated by grease, with an oil conduit in the middle used to observe the conditions of sealing and recovery of heat conduction oil.
Heat pump is a single-stage, single suction cantilever structure, bearing seat, a connecting pipe connected with the pump hydraulic components, the liquid from the liquid outlet pipe parts discharge pump impeller semi open impeller, a stirring blade in the blade extends at the inlet, a heat pump is the main characteristics of the pump shaft in the lower part of the solution of a enough stiffness, impeller, pump shell bearing set between the seal, can be transported with a larger depth of solid particles of the medium. The length of the pump into the liquid between 800-2000, if necessary, can be equipped with suction tube. The heat transfer oil pump shaft seal adopts the liquid pump to be inserted into the liquid to run, and no shaft seal is arranged. The transmission is arranged on the motor bearing and the bearing seat by a vertical motor.
Heat oil with advanced technology, high efficiency, long-term stable operation without leakage in hot state, no additional cooling system, the use of safe and reliable, the heating system in our country has been widely used, has entered all petroleum and chemical industry, rubber, plastics, pharmaceutical, textile, printing and dyeing, food, building industry fields such as heat pump is mainly used for conveying solid particles of weak corrosive high temperature liquid, using temperature are less than 370, is a kind of ideal hot oil circulation pump.

Similar Product Recommend