Welcome Customer !

Membership

Botou Yijia Industry Co. Ltd.
Free Member ·1YRS
,
Other

Main Products: 水泵

Xwboo>Products

YCB5 arc gear oil pump

Model
Nature of the Manufacturer
Other
Product Category
YCB arc gear pump
Place of Origin
City, Province
Overview
YCB5 arc gear oil pump
Product Details

  YCB arc gear pump for conveying lubricating oil lubrication system in all kinds of mechanical equipment, suitable for conveying viscosity is 5 * 10-6 to 1.5 * 10-3m2/s (5-1500cSt), at a temperature of 300 DEG C with lubricating oil. YCB arc gear oil pump can transport non lubricating oil, beverage, low corrosive liquid. Copper wheel pump can transfer the low point liquid, such as gasoline, benzene, etc.. This series of pumps in addition to the configuration of ordinary motor, but also according to the user needs to configure the same specification explosion-proof motor.

  Application range of YCB arc gear pump:

  YCB arc pump can be used as transmission in the oil transportation system;

  A fuel pump for use in a fuel system for delivery, pressurization, and injection;

  Hydraulic pump for hydraulic power supply in hydraulic transmission system;

  In all industrial fields, can be used for lubricating oil pump.

  Structural characteristics of YCB arc gear oil pump:

  The YCB circular arc gear pump adopts the international advanced transmission gear which is considered to be more advanced than that of the transmission pump, namely, the double arc and the sine curve are combined into a tooth shape. National Science and technology has been a major scientific and technological achievements, and won the national science and Technology Progress Award three. The circular arc gear is a little continuous contact between the two meshing teeth, which can not cause the phenomenon of trapped oil, and thoroughly solves the phenomenon that the vibration, the noise and the bearing load of the involute gear pump are caused by the oil trapped phenomenon. Therefore, YCB arc gear pump has the advantages of high efficiency, low noise and good energy saving effect.

  This series of gear pumps are mainly gear, shaft, pump body, pump cover, bearing sleeve, shaft seal and other components. Double circular arc sine curve tooth profile. Compared with the involute gear, it has the advantage that there is no relative sliding in the tooth profile of the gear meshing process, so it has no wear, smooth operation, no liquid phenomenon, low noise, long life and high efficiency. The pump is out of the shackles of traditional design, making the gear pump in the design, production and use of a new field.

  The pump is equipped with a safety valve for overload protection, and the full return pressure of the safety valve is 1.5 times of the rated discharge pressure of the pump. It can also be adjusted within the allowable discharge pressure according to the actual needs. But note that the safety valve can not be used for long-term work, the need to be installed on the pipeline.

  Pump shaft seal design for two forms, one for the mechanical seal, one is the packing seal, can be determined according to the specific use and user requirements.

Similar Product Recommend