KCB stainless steel gear pump series

KCB stainless steel gear pump Scope:
Stainless steel gear pump for conveying solid particles and fibers , high temperature or corrosive liquids , temperature no higher than 120 ℃, viscosity 5 ~ 1500cst oil or other liquids similar nature lubricants .
Uses:
KCB gear pump in stainless steel sanitary conditions demanding applications, such as medicine, food industry : the weak corrosive applications, such as fine chemicals, cosmetics, printing and dyeing , brewing industry .
Features:
The KCB series gear pump of stainless steel gears, shafts , pump, valve , shaft seals and other component parts, gears after heat treatment have a higher hardness and strength , install operating in replaceable shaft sleeve is mainly used in conjunction with transport in a variety of machinery and equipment in the oil lubrication system for conveying a viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt), at temperatures below 300 ℃ has lubricity fuel . , Can transport non-lubricating oil, beverage , low corrosive liquids. Equipped with low copper gear can transport the point liquids such as gasoline , benzene. In addition to this series stainless steel pump configuration ordinary motor , it can also be configured with the specifications of explosion-proof motor according to the user . Material : 304.316.316L stainless steel.
● Scope
Can be used in the oil transfer system, booster pump ;
Used as a transport fuel systems , pressure , fuel injection pump ;
In all industrial areas, can be used as a lubricating oil pump .
● structural features
KCB stainless steel gear pump gears , shafts , pump, valve , shaft seal formed . Heat treated gears have high hardness and strength , together with the operating shaft mounted in a replaceable bushings. All parts of the pump are lubricated by the output medium automatically when the pump is working to achieve .
KCB stainless steel gear pump within a reasonable design drain and return tank, gear to withstａnd the torque force at work a minimum , thus bearing loads of small, wear , high pump efficiency .
KCB gear pump with a stainless steel valve as overload protection , pressure relief valves total reflux pump pressure of 1.5 times the nominal exclusion , but also allow the discharge adjusted according to actual needs another within the pressure range. But note that this safety valve relief valve can not be long-term work , when necessary, be installed in the pipeline .
Overhang from the spindle end to the pump to see , for the clockwise rotation.
Large flow gear pumps, gear pumps, unloaded pump , pump, pump original , marine gear pumps.
Flow : 1.1m3/h-600m3/h pressure : 0.28MPa - 2.5MP.
KCB stainless steel gear pump is mainly used for high flow oil fields , oil depots, ports, docks, ships, unloading !
● Performance Parameters