YCB vertical arc gear pump

● Use
     YCB arc gear pump for conveying solid particles and fibers , non-corrosive, temperature no higher than 80 ℃, the viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) of oil or other liquid lubricants similar nature , as well as for hydraulic transmission .
● Applications
YCB arc gear pump can be used in the oil transfer system , booster ; arc gear pump in the fuel system can be used as transport , pressure, fuel injection pump ; in the hydraulic system used to provide hydraulic hydraulic power ; in all industrial areas , can make oil pump .
● structural features
   This series gear pump gears , shafts , pump, pump cover , sleeve bearings , shaft seals and other components. Dual arc sine curve gear tooth manufacturing . Compared with involute gear most prominent advantage is the gear tooth profile meshing process is no relative sliding surface , so no tooth wear, smooth operation, no phenomenon due to fluid , low noise, long life , high efficiency. The pump is designed to get rid of the shackles of the traditional , the gear pump in the design, production and use into a new area. Pump has overload protection as a safety valve , pressure relief valve total reflux pump discharge pressure of 1.5 times the rated . Also be allowed to be adjusted according to actual needs discharge pressure range . But note that this is not a safety valve for pressure reducing long-term work , when necessary, be installed in the pipeline .
Shaft end seal design in two forms , one for mechanical seals , one is packing can be determined according to the specific usage and user requirements. Overhang from the spindle end to the pump to see , for the clockwise rotation.
YCB series arc gear pump performance parameter table