Working principle : Clean air is heated into the drying tower, with two fluid in the tower in the air (or three fluid) will all feed liquid atomizing nozzle into tiny droplets, fast heat exchange with the hot air, evaporated liquid in water (or solvent), and with the hot air discharged by powder products. Note: 1.Bag filter according to the product needs to be equipped with . 2.Part for the recovery of the solvent system is equipped with . 3.According to the requirements of the circulatory system, the ordinary type of open system .
| Characteristic : ● Especially for the spray drying of high viscosity, paste, paste material effect, cannot be replaced by other equipment. ● Experimental multi variety, low temperature drying application. ● The nozzle has the advantages of simple structure, convenient maintenance and low operating cost.
| Technological process:  | 1.Liquid trough 2.Liquid feed pump 3.compressed air 4.Air flow nozzle 5.Drying tower 6.cyclone separator 7.Bag filter 8.heater |
| technical parameter Parameter / model | 5 | 25 | 50 | 100 | 150 | 200 | Evaporation rate kg/h | △t=150℃-90℃ | 1.5 | 7.5 | 15 | 30 | 45 | 60 | △t=200℃-100℃ | 2.5 | 12.5 | 25 | 50 | 75 | 100 | △t=250℃-100℃ | 3.75 | 18.75 | 37.5 | 75 | 112.5 | 150 | △t=300℃-100℃ | 5 | 25 | 50 | 100 | 150 | 200 | △t=350℃-110℃ | 6 | 30 | 60 | 120 | 200 | 240 | compressed air m3/min | 0.3 | 0.4 | 0.6 | 1.5 | 2.7 | 3.4 | Compressed air pressure Mpa | 0.4 | 0.6 | 0.7 | Heat source mode | Electric, electric and steam, coal (oil) hot blast stove | Heating capacity 104kcal/h | 1 | 5 | 10 | 20 | 30 | 40 | Fan power kw | 0.75 | 2.2 | 4 | 7.5 | 11 | 15 |
|
|
|