[Production capacity]: 180-10000t/h[product weight]: 149.61-1659t[product specifications]: 2.540-6.095[Scope of application]: It can process ceramsite sand calcium carbonate carbon and other materials and is widely used in construction chemical building materials and other industries.
Product introduction
Ceramsite sand rotary kiln made by Tongli Heavy Machinery has: automatic temperature control and overtemperature alarm secondary air waste heat utilization kiln liner life is long advanced technology and device of kiln head and tail sealing stably running high output and other characteristics.
Structure principle
Raw material in the rotary kiln calcining process is feed from the cold end of the kiln due to the kiln has a slope and constantly rotating so that raw material is moving towards the hot end .From Injection fuel from the hot end under the air fuel combustion heat release and generate high temperature flue gas heat in the driving of the fan the flow from the hot end to the cold end and the material and heat exchange with the flue gas in the process of reverse movement burn mature material slurry.Therefore studies the working principle of the rotary kiln mainly is the study of material movement in the stove furnace gas flow fuel combustion and materials between the gas and heat transfer phenomena and laws.
Technical advantage
1.New Ceramsite sand rotary kiln simple structure conveniently and reliably control the production process less quick-wear parts high operation rates high-quality products from kiln. The burner insert from the cylinder body hot side ;There is coal injection pipe oil nozzle gas nozzle etc.
2. Kiln body is made of high quality composed of carbon steel or alloy steel plate and automatic welding; tyre roller open gear adopts alloy cast steel; Cylinder is made of steel plate is the body of rotary kiln; Cylinder lining fireproofing called kiln lining thickness is 150 ~ 250 mm.
3.Sliding bearing with large gap not scraping tile bearing; Transmission device adopts hard tooth reducer flexible diaphragm coupling DC motor driving; Adopts hydraulic gear thruster; Set a slow drive device.
4.The kiln hood is midbody of hot end and next working procedure; Kiln tail hood is midbody of cold end and material pretreatment equipment and smoke treatment device.
5.Kiln head and kiln tail use flake overlying and air cylinder to press and seal good sealing effect.
Latest case
350000 tons/year Ceramsite sand rotary kiln (two φ4.8x80m kiln with φ3.6x50m rotary cooler) ——TongLi Heavy Machinery made for South Africa * * * iron and steel company equipment stably running Standard reaches producing.
【Day running】:24h
【Feeding materia】: Clay slate shale coal gangue industrial solid waste
【Product】:Ceramsite
【Capacity:】:350000 tons/year
Technical parameter
sequence No. | specifications (m) | Ceramsite production capacity | slope (%) | cylinder speed (r/min) | motor | reducer model | note |
production (m3/h) | annual (m3/y) | model | power (kw) |
1 | φ1.5×26 | 3.21~3.85 | 1.96ten thousand ~2.35ten thousand | 4 | 1.2~3.6 | YCT-250-4A | 22 | ZQ850 | |
2 | φ1.8×28 | 4.56~5.46 | 2.78ten thousand ~3.34ten thousand | 4 | 1.2~3.6 | YCT280-4A | 30 | ZL75 | |
3 | φ2.2×30 | 6.34~7.6 | 3.88ten thousand ~4.65ten thousand | 4 | 1~3.0 | YCT315-4A | 45 | ZS125 | |
4 | φ2.4×33 | 8.32~9.99 | 5.09ten thousand ~6.11ten thousand | 4 | 1~3.0 | YCT315-4B | 75 | ZS125 | |
5 | φ2.6×28- φ3.0×20 | 14.68~17.62 | 8.98ten thousand ~10.78ten thousand | 4 | 1.2~3.6 | YCT355-4C | 90 | ZS165 | |