[Maximum output per unit]: 150T[Motor power]: 55[Scope of application]: Hazardous waste disposal production line[Applicable materials]: Domestic garbage medical waste solid waste incineration and various hazardous wastes
Product introduction
The accumulation of large cement rotary kiln Tongli heavy machine technology for many years in 2006 for the development of toxic waste pollution of the rotary kiln incineration equipment. After years of technical improvement is a mature equipment. The rotary kiln is mainly composed of a kiln body a transmission device a supporting device a wheel retaining device a kiln head sealing device a kiln tail sealing device a kiln head cover etc.
Structure principle
Incineration rotary kiln is the only ideal choice for waste containing a variety of difficult to burn substances or a large range of changes in the moisture content of waste incineration rotary kiln. The rotary kiln equipment through the change of the rotational speed can be adjusted the residence time of waste in a kiln and hazardous waste imposed strong mechanical collision in high temperature air and excess oxygen in the waste combustion treatment to the maximum extent and minimal ash conveniently processing.
Waste rotary kiln can handle a wide range especially in hazardous waste solid waste waste gas and waste slurry (such as organic sludge and inorganic sludge waste medical waste waste oil chemical metallurgy chemical waste) incineration is widely used
Technical advantage
1 the device can simultaneously incineration of solid waste liquid gas strong adaptability to incineration;
2 burning material forward three kinds of heat transfer mode coexist in a furnace the heat utilization rate is higher;
3 lining refractory materials for different materials long service life and easy to replace low maintenance costs;
4 the transmission mechanism is simple the transmission mechanism are in the kiln shell equipment operation safety maintenance is simple;
5 supporting the variable frequency motor can adjust the speed of the kiln body control material retention time.
6 the longer residence time of the rotary kiln and the high temperature of 1100 degrees Celsius so that the comprehensive pyrolysis of hazardous waste part of the low burn off the basic waste
7 according to the design of different hazardous waste graphite seal and scale film seal in two forms good sealing measures and furnace negative pressure to ensure that harmful gases do not leak;
8 equipment operation rate is high the annual operating rate can reach more than 90% easy operation and maintenance;
9 in addition to prevent the formation of slag in the rotary kiln device while increasing the burning rate of the expansion of the incinerator for waste
10 the factory has its own electric arc furnace. The main casting material by our own casting more fitting production requirements; and the full use of its own raw material melting workshop quality scraps not from the outside to buy scrap metal impurities ensure the quality of castings so as to ensure the quality of the equipment
Latest case
| NO. | Company name | Model |
| 1 | Jiangsu Jihua 80 tons / day hazardous waste drying and burning project | φ3700×16000 |
| 2 | Qianjin Chemical 30 tons / day hazardous waste drying incineration project | φ2500×13000 |
| 3 | Changzhou North American Chemical Group Co. Ltd. 30 tons / day hazardous waste project | φ1800×18000 |
| 4 | 100 tons/day sludge resource disposal project of Yucheng County Wastewater Treatment Plant in Linyi City | φ2500×13000 |
| 5 | Shangyu City Huanxing Sludge Treatment Co. Ltd. 350 tons / day sludge resource disposal project | φ3700×16000 |
| 6 | Northern Pharmaceuticals 800 tons / day sludge concentrate resource utilization project | φ3700×16000 |
| 7 | 350 ton / day sludge drying project of Zhuji Tianji Huanxing Waste Disposal Co. Ltd. | φ3700×21000 |
| 8 | Xiaoshan Urban Sewage Treatment Plant Sludge Incineration Project | φ2900×9000 |
| 9 | Shaoxing Water Treatment Development Co. Ltd. Sludge Incineration Project | φ3700×21000 |
| 10 | Fuxin Capital Wastewater Treatment Plant Sludge Incineration Project | φ3400×17500 |
| 11 | Jiangsu Yuxin Environmental Protection Co. Ltd. 100t/day hazardous waste production line | φ3800×16000 |
| 12 | Shanghai Lvzou Environmental Protection Engineering Co. Ltd. 100t/Dangerous Waste Incineration Treatment Project (larger domestic incineration rotary kiln) | Φ4300×16000 |
| 13 | New Zhongtian Environmental Protection Project - Huanghua Xinzhi 50t/Dangerous Waste Incineration Treatment Project | Φ3350×1100 |
| 14 | Xin Zhongtian Environmental Protection Project-Zhoushan 50t/Tianjin Waste Incineration Treatment Project | Φ3350×1200 |
| 15 | Nanjing Tianyu Jade Belt Industrial Park Hazardous Waste Disposal Project | Φ3660×1300 |
| * | ********* | ****** |
| * | Click on the online to consult more cases | More cases |
Technical parameter
Sludge incineration kiln specifications:| Specification | Prod.capacity | Rotation speed of kiln body | Power |
| m | t/d | R/min | kw |
| Ø2.5×13 | 100 | 0.06~3(Speed adjustable) | 15-22 |
| Ø2.9×13 | 150 | 0.06~3(Speed adjustable) | 22-37 |
| Ø3.4×17.5 | 200 | 0.06~3(Speed adjustable) | 22-37 |
| Ø3.7×21 | 350 | 0.06~3(Speed adjustable) | 37-45 |
Sludge incineration kiln specifications::| Specification | Prod.capacity | Rotation speed of kiln body | Power |
| m | t/d | R/min | kw |
| Ø2.6×9 | 15 | 0.06~3(Speed adjustable) | 15 |
| Ø3.0×13 | 30 | 0.06~3(Speed adjustable) | 22 |
| Ø3.3×12 | 50 | 0.06~3(Speed adjustable) | 22 |
| Ø3.6×11 | 70 | 0.06~3(Speed adjustable) | 37 |
| Ø3.8×16 | 100 | 0.06~3(Speed adjustable) | 37 |
| Ø4.3×16 | 100-120 | 0.06~3(Speed adjustable) | 45 |
Note: The production capacity is based on the initial estimation of the combustion space inside the kiln which is subject to the actual processing material design.