，-
E-mail
info@tlzjmachinery.com
-
Phone
008621-33587123
-
Address
1885, Duhui Road, Minhang District , Shanghai
Product Categories
Shanghai Tongli Heavy Machinery Co., Ltd.Free·1YRS
Pellet dryer
NegotiableUpdate on July 04
- Model
- Nature of the Manufacturer
- Other
- Product Category
- Dryer
- Place of Origin
- City, Province
Overview
[Production capacity]: 1.0-3.5t/h[weight]: 5.6t[power]: 5.5kw[Speed]: 3-8r/min[Applicable materials] Widely used in building materials, metallurgy, chemical industry, cement industry drying iron concentrate pellets, slag, limestone, coal powder, slag, clay and other materials.
Product Details
Product introduction
The pellet dryer is a drying equipment for processing a large amount of materials. It has reliable operation, large operation flexibility, strong adaptability, large processing capacity, strong adaptability of materials, drying of various materials, and simple and reliable operation of the equipment. Widely used in building materials, metallurgy, chemical industry, cement industry, etc. It can be used to dry iron concentrate pellets, slag, limestone, coal powder, slag, clay and other materials, especially for iron concentrate pellets, slag and pulp.
Structure principle
The pellet dryer is mainly composed of a rotating body, a lifting plate, a transmission device, a supporting device and a sealing ring. The drying cylinder is a rotating cylinder that is slightly inclined with respect to the horizontal line. The material is added from the higher end, and the high-temperature hot flue gas and the material co-currently enter the cylinder. As the cylinder rotates, the material runs to the lower end. The copy board on the inner wall of the cylinder picks up and sprinkles the material, so that the contact surface of the material and the air flow is increased to increase the drying rate and promote the advancement of the material, and the dried product is collected from the lower portion of the bottom end.
Technical advantage
1. The pellet dryer dryer has large processing capacity, low fuel consumption and low drying cost.
2. The pellet dryer has the characteristics of high temperature resistance, and can quickly dry the materials using high temperature hot air.
3, the scalability is strong, the design considers the production margin, even if the output increases slightly, there is no need to replace the equipment.
4. The equipment adopts the self-aligning tug structure, and the cooperation between the tug and the rolling ring is good, which greatly reduces the wear and power consumption.
5. The specially designed retaining wheel structure greatly reduces the horizontal thrust caused by the tilting work of the equipment.
6. Strong anti-overload capability and stable operation of the cylinder.
Latest case
The pellet dryer manufactured by Tongli Heavy Machinery Co., Ltd. was successfully put into operation in South Africa *** Steel Company, and the equipment was running stably and reached the standard.
Technical parameter
| model （mm） | Slope （%） | Rotating speed （r/min） | Into the temperature （℃） | power （kw） | Production capacity （t/h） | weight （t） |
| Ф600x6000 | 3-5 | 3-8 | ≤700 | 3 | 0.5-1.5 | 2.9 |
| Ф800x8000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.0 | 3.5 |
| Ф800x10000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.5 | 4.5 |
| Ф1000x10000 | 3-5 | 3-8 | ≤700 | 5.5 | 1.0-3.5 | 5.6 |
| Ф1200x10000 | 3-5 | 3-8 | ≤700 | 7.5 | 1.8-5 | 14.5 |
| Ф1200x12000 | 3-5 | 3-8 | ≤700 | 11 | 2-6 | 14.8 |
| Ф1500x12000 | 3-5 | 2-6 | ≤800 | 15 | 3.5-9 | 17.8 |
| Ф1800x12000 | 3-5 | 2-6 | ≤800 | 18 | 5-12 | 25 |
| Ф2200x12000 | 3-5 | 1.5-6 | ≤800 | 18.5 | 6-15 | 33 |
| Ф2200x18000 | 3-5 | 1.5-6 | ≤800 | 22 | 10-18 | 53.8 |
| Ф2200x20000 | 3-5 | 1.5-6 | ≤800 | 30 | 12-20 | 56 |
| Ф2400x20000 | 3-5 | 1.5-5 | ≤800 | 37 | 18-30 | 60 |
| Ф3000x20000 | 3-5 | 1.5-5 | ≤800 | 55 | 25-35 | 78 |
| Ф3000x25000 | 3-5 | 1.5-5 | ≤800 | 75 | 32-40 | 104.9 |
Similar Product Recommend